Skip to main content

Comment for 1026.20 Disclosure Requirements Regarding Post-Consummation Events

20(a) Refinancings

1. Definition. A refinancing is a new transaction requiring a complete new set of disclosures. Whether a refinancing has occurred is determined by reference to whether the original obligation has been satisfied or extinguished and replaced by a new obligation, based on the parties’ contract and applicable law. The refinancing may involve the consolidation of several existing obligations, disbursement of new money to the consumer or on the consumer’s behalf, or the rescheduling of payments under an existing obligation. In any form, the new obligation must completely replace the prior one.

i. Changes in the terms of an existing obligation, such as the deferral of individual installments, will not constitute a refinancing unless accomplished by the cancellation of that obligation and the substitution of a new obligation.

ii. A substitution of agreements that meets the refinancing definition will require new disclosures, even if the substitution does not substantially alter the prior credit terms.

2. Exceptions. A transaction is subject to § 1026.20(a) only if it meets the general definition of a refinancing. Section 1026.20(a)(1) through (5) lists 5 events that are not treated as refinancings, even if they are accomplished by cancellation of the old obligation and substitution of a new one.

3. Variable-rate.

i. If a variable-rate feature was properly disclosed under the regulation, a rate change in accord with those disclosures is not a refinancing. For example, no new disclosures are required when the variable-rate feature is invoked on a renewable balloon-payment mortgage that was previously disclosed as a variable-rate transaction.

ii. Even if it is not accomplished by the cancellation of the old obligation and substitution of a new one, a new transaction subject to new disclosures results if the creditor either:

A. Increases the rate based on a variable-rate feature that was not previously disclosed; or

B. Adds a variable-rate feature to the obligation. A creditor does not add a variable-rate feature by changing the index of a variable-rate transaction to a comparable index, whether the change replaces the existing index or substitutes an index for one that no longer exists. For example, a creditor does not add a variable-rate feature by changing the index of a variable-rate transaction from the 1-month, 3-month, 6-month, or 12-month U.S. Dollar LIBOR index to the Board-selected benchmark replacement for consumer loans to replace the 1-month, 3-month, 6-month, or 12-month U.S. Dollar LIBOR index respectively because the replacement index is a comparable index to the corresponding U.S. Dollar LIBOR index. See § 1026.2(a)(28) for the definition of the Board-selected benchmark replacement for consumer loans. See comment 20(a)-3.iv for factors to be used in determining whether a replacement index is comparable to a particular LIBOR index.

iii. If either of the events in paragraph 20(a)-3.ii.A or ii.B occurs in a transaction secured by a principal dwelling with a term longer than one year, the disclosures required under § 1026.19(b) also must be given at that time.

iv. Except for the Board-selected benchmark replacement for consumer loans as defined in § 1026.2(a)(28), the relevant factors to be considered in determining whether a replacement index is comparable to a particular LIBOR index depend on the replacement index being considered and the LIBOR index being replaced. For example, these determinations may need to consider certain aspects of the historical data itself for a particular replacement index, such as whether the replacement index is a backward-looking rate (e.g., historical average of rates) such that timing aspects of the data may need to be adjusted to match up with the particular forward-looking LIBOR term-rate being replaced. The types of relevant factors to establish if a replacement index could meet the “comparable” standard with respect to a particular LIBOR index using historical data or future expectations, include but are not limited to, whether: (1) the movements over time are comparable; (2) the consumers’ payments using the replacement index compared to payments using the LIBOR index are comparable if there is sufficient data for this analysis; (3) the index levels are comparable; (4) the replacement index is publicly available; and (5) the replacement index is outside the control of the creditor. The Board-selected benchmark replacement for consumer loans is considered comparable with respect to the LIBOR tenor being replaced, and therefore, these factors need not be considered.

4. Unearned finance charge. In a transaction involving precomputed finance charges, the creditor must include in the finance charge on the refinanced obligation any unearned portion of the original finance charge that is not rebated to the consumer or credited against the underlying obligation. For example, in a transaction with an add-on finance charge, a creditor advances new money to a consumer in a fashion that extinguishes the original obligation and replaces it with a new one. The creditor neither refunds the unearned finance charge on the original obligation to the consumer nor credits it to the remaining balance on the old obligation. Under these circumstances, the unearned finance charge must be included in the finance charge on the new obligation and reflected in the annual percentage rate disclosed on refinancing. Accrued but unpaid finance charges are included in the amount financed in the new obligation.

5. Coverage. Section 1026.20(a) applies only to refinancings undertaken by the original creditor or a holder or servicer of the original obligation. A “refinancing” by any other person is a new transaction under the regulation, not a refinancing under this section.

Paragraph 20(a)(1)

1. Renewal. This exception applies both to obligations with a single payment of principal and interest and to obligations with periodic payments of interest and a final payment of principal. In determining whether a new obligation replacing an old one is a renewal of the original terms or a refinancing, the creditor may consider it a renewal even if:

i. Accrued unpaid interest is added to the principal balance.

ii. Changes are made in the terms of renewal resulting from the factors listed in § 1026.17(c)(3).

iii. The principal at renewal is reduced by a curtailment of the obligation.

Paragraph 20(a)(2)

1. Annual percentage rate reduction. A reduction in the annual percentage rate with a corresponding change in the payment schedule is not a refinancing. If the annual percentage rate is subsequently increased (even though it remains below its original level) and the increase is effected in such a way that the old obligation is satisfied and replaced, new disclosures must then be made.

2. Corresponding change. A corresponding change in the payment schedule to implement a lower annual percentage rate would be a shortening of the maturity, or a reduction in the payment amount or the number of payments of an obligation. The exception in § 1026.20(a)(2) does not apply if the maturity is lengthened, or if the payment amount or number of payments is increased beyond that remaining on the existing transaction.

Paragraph 20(a)(3)

1. Court agreements. This exception includes, for example, agreements such as reaffirmations of debts discharged in bankruptcy, settlement agreements, and post-judgment agreements. (See the commentary to § 1026.2(a)(14) for a discussion of court-approved agreements that are not considered “credit.”)

Paragraph 20(a)(4)

1. Workout agreements. A workout agreement is not a refinancing unless the annual percentage rate is increased or additional credit is advanced beyond amounts already accrued plus insurance premiums.

Paragraph 20(a)(5)

1. Insurance renewal. The renewal of optional insurance added to an existing credit transaction is not a refinancing, assuming that appropriate Truth in Lending disclosures were provided for the initial purchase of the insurance.

20(b) Assumptions

1. General definition.

i. An assumption as defined in § 1026.20(b) is a new transaction and new disclosures must be made to the subsequent consumer. An assumption under the regulation requires the following three elements:

A. A residential mortgage transaction.

B. An express acceptance of the subsequent consumer by the creditor.

C. A written agreement.

ii. The assumption of a nonexempt consumer credit obligation requires no disclosures unless all three elements are present. For example, an automobile dealer need not provide Truth in Lending disclosures to a customer who assumes an existing obligation secured by an automobile. However, a residential mortgage transaction with the elements described in § 1026.20(b) is an assumption that calls for new disclosures; the disclosures must be given whether or not the assumption is accompanied by changes in the terms of the obligation. (See comment 2(a)(24)-5 for a discussion of assumptions that are not considered residential mortgage transactions.)

2. Existing residential mortgage transaction. A transaction may be a residential mortgage transaction as to one consumer and not to the other consumer. In that case, the creditor must look to the assuming consumer in determining whether a residential mortgage transaction exists. To illustrate: The original consumer obtained a mortgage to purchase a home for vacation purposes. The loan was not a residential mortgage transaction as to that consumer.

3. Express agreement. Expressly agrees means that the creditor's agreement must relate specifically to the new debtor and must unequivocally accept that debtor as a primary obligor.

i. Approval of creditworthiness.

ii. Notification of a change in records.

iii. Mailing of a coupon book to the subsequent consumer.

iv. Acceptance of payments from the new consumer.

4. Retention of original consumer. The retention of the original consumer as an obligor in some capacity does not prevent the change from being an assumption, provided the new consumer becomes a primary obligor. But the mere addition of a guarantor to an obligation for which the original consumer remains primarily liable does not give rise to an assumption.

5. Status of parties. Section 1026.20(b) applies only if the previous debtor was a consumer and the obligation is assumed by another consumer. It does not apply, for example, when an individual takes over the obligation of a corporation.

6. Disclosures. For transactions that are assumptions within this provision, the creditor must make disclosures based on the “remaining obligation.” For example:

i. The amount financed is the remaining principal balance plus any arrearages or other accrued charges from the original transaction.

ii. If the finance charge is computed from time to time by application of a percentage rate to an unpaid balance, in determining the amount of the finance charge and the annual percentage rate to be disclosed, the creditor should disregard any prepaid finance charges paid by the original obligor, but must include in the finance charge any prepaid finance charge imposed in connection with the assumption.

iii. If the creditor requires the assuming consumer to pay any charges as a condition of the assumption, those sums are prepaid finance charges as to that consumer, unless exempt from the finance charge under § 1026.4. If a transaction involves add-on or discount finance charges, the creditor may make abbreviated disclosures, as outlined in § 1026.20(b)(1) through (5).

7. Abbreviated disclosures. The abbreviated disclosures permitted for assumptions of transactions involving add-on or discount finance charges must be made clearly and conspicuously in writing in a form that the consumer may keep. However, the creditor need not comply with the segregation requirement of § 1026.17(a)(1). The terms annual percentage rate and total of payments, when disclosed according to § 1026.20(b)(4) and (5), are not subject to the description requirements of § 1026.18(e) and (h). The term annual percentage rate disclosed under § 1026.20(b)(4) need not be more conspicuous than other disclosures.

20(c) Rate adjustments with a corresponding change in payment.

1. Creditors, assignees, and servicers. Creditors, assignees, and servicers that own either the applicable adjustable-rate mortgage or the applicable mortgage servicing rights or both are subject to the requirements of § 1026.20(c). Creditors, assignees, and servicers are also subject to the requirements of any provision of subpart C that governs § 1026.20(c). For example, the form requirements of § 1026.17(a) apply to § 1026.20(c) disclosures and thus, assignees and servicers, as well as creditors, are subject to those requirements. While creditors, assignees, and servicers are all subject to the requirements of § 1026.20(c), they may decide among themselves which of them will provide the required disclosures.

2. Loan modifications. Under § 1026.20(c), the interest rate adjustment disclosures are required only for interest rate adjustments occurring pursuant to the loan contract. Accordingly, creditors, assignees, and servicers need not provide the disclosures for interest rate adjustments occurring in loan modifications made for loss mitigation purposes. Subsequent interest rate adjustments resulting in a corresponding payment change occurring pursuant to the modified loan contract, however, are subject to the requirements of § 1026.20(c).

3. Conversions. In addition to the disclosures required for interest rate adjustments under an adjustable-rate mortgage, § 1026.20(c) also requires the disclosures for an ARM converting to a fixed-rate transaction when the conversion changes the interest rate and results in a corresponding payment change. When an open-end account converts to a closed-end adjustable-rate mortgage, the § 1026.20(c) disclosure is not required until the implementation of an interest rate adjustment post-conversion that results in a corresponding payment change. For example, for an open-end account that converts to a closed-end 3/1 hybrid ARM, i.e., an ARM with a fixed rate of interest for the first three years after which the interest rate adjusts annually, the first § 1026.20(c) disclosure would not be required until three years after the conversion, and only if that first adjustment resulted in a payment change.

Paragraph 20(c)(1)(i).

1. In general. An adjustable-rate mortgage, as defined in § 1026.20(c)(1)(i), is a variable-rate transaction as that term is used in subpart C, except as distinguished by comment § 1026.20(c)(1)(ii)-3. The requirements of this section are not limited to transactions financing the initial acquisition of the consumer's principal dwelling.

Paragraph 20(c)(1)(ii).

1. Short-term ARMs. Under § 1026.20(c)(1)(ii), construction, home improvement, bridge, and other loans with terms of one year or less are not subject to the requirements in § 1026.20(c). In determining the term of a construction loan that may be permanently financed by the same creditor or assignee, the creditor or assignee may treat the construction and the permanent phases as separate transactions with distinct terms to maturity or as a single combined transaction.

2. First new payment due within 210 days after consummation. Section 1026.20(c) disclosures are not required if the first payment at the adjusted level is due within 210 days after consummation, when the new interest rate disclosed at consummation pursuant to § 1026.20(d) is not an estimate. For example, the creditor, assignee, or servicer would not be required to provide the disclosures required by § 1026.20(c) for the first time an ARM interest rate adjusts if the first payment at the adjusted level was due 120 days after consummation and the adjusted interest rate disclosed at consummation pursuant to § 1026.20(d) was not an estimate.

3. Non-adjustable-rate mortgages. The following transactions, if structured as fixed-rate and not as adjustable-rate mortgages based on an index or formula, are not subject to § 1026.20(c):

i. Shared-equity or shared-appreciation mortgages;

ii. Price-level adjusted or other indexed mortgages that have a fixed rate of interest but provide for periodic adjustments to payments and the loan balance to reflect changes in an index measuring prices or inflation;

iii. Graduated-payment mortgages or step-rate transactions;

iv. Renewable balloon-payment instruments; and

v. Preferred-rate loans.

Paragraph 20(c)(2).

1. Timing. The requirement that § 1026.20(c) disclosures be provided to consumers within a certain timeframe means that the creditor, assignee, or servicer must deliver the notice or place it in the mail within that timeframe, excluding any grace or courtesy periods. The requirement that the § 1026.20(c) disclosures must be provided between 25 and 120 days before the first payment at the adjusted level is due for frequently-adjusting ARMs, applies to ARMs that adjust regularly at a maximum of every 60 days.

Paragraph 20(c)(2)(ii)(A).

1. Current and new interest rates. The current interest rate is the interest rate that applies on the date the disclosure is provided to the consumer. The new interest rate is the actual interest rate that will apply on the date of the adjustment. The new interest rate is used to determine the new payment. The “new interest rate” has the same meaning as the “adjusted interest rate.” The requirements of § 1026.20(c)(2)(ii)(A) do not preclude creditors, assignees, and servicers from rounding the interest rate, pursuant to the requirements of the ARM contract.

Paragraph 20(c)(2)(iv).

1. Rate limits and foregone interest rate increases. Interest rate carryover, or foregone interest rate increases, is the amount of interest rate increase foregone at any ARM interest rate adjustment that, subject to rate caps, can be added to future interest rate adjustments to increase, or to offset decreases in, the rate determined by using the index or formula. The disclosures required by § 1026.20(c)(2)(iv) regarding foregone interest rate increases apply only to transactions permitting interest rate carryover.

Paragraph 20(c)(2)(v)(B).

1. Application of previously foregone interest rate increases. The disclosures regarding the application of previously foregone interest rate increases apply only to transactions permitting interest rate carryover.

Paragraph 20(c)(2)(vi).

1. Amortization statement. For ARMs requiring the payment of interest only, such as interest-only loans, § 1026.20(c)(2)(vi) requires a statement that the new payment covers all of the interest but none of the principal, and therefore will not reduce the loan balance. For negatively-amortizing ARMs, § 1026.20(c)(2)(vi) requires a statement that the new payment covers only part of the interest and none of the principal, and therefore the unpaid interest will be added to the principal balance.

2. Amortization payment. Disclosure of the payment needed to amortize fully the outstanding balance at the new interest rate over the remainder of the loan term is required only when negative amortization occurs as a result of the interest rate adjustment. The disclosure is not required simply because a loan has interest-only or partially-amortizing payments. For example, an ARM with a five-year term and payments based on a longer amortization schedule, in which the final payment will equal the periodic payment plus the remaining unpaid balance, does not require disclosure of the payment necessary to amortize fully the loan in the remainder of the five-year term. A disclosure is also not required when the new payment is sufficient to prevent negative amortization but the final loan payment will be a different amount due to rounding.

Paragraph 20(c)(2)(vii).

1. Prepayment penalty. The creditor, assignee, or servicer of an ARM with no prepayment penalty, as that term is used in § 1026.20(c)(2)(vii), may decide to exclude the prepayment section from the § 1026.20(c) disclosure, retain the prepayment section and insert after the heading “None” or other indication that there is no prepayment penalty, or indicate there is no prepayment penalty in some other manner. See also comment 1.vi to Appendices G and H - Open-End and Closed-End Model Forms and Clauses.

Paragraph 20(c)(3)(i).

1. Format of disclosures. The requirements of § 1026.20(c)(3)(i) and (ii) to provide the § 1026.20(c) disclosures in the same order as, and with headings and format substantially similar to, the model and sample forms do not preclude creditors, assignees, and servicers from modifying the disclosures to accommodate particular consumer circumstances or transactions not addressed by the forms. For example, in the case of a consumer bankruptcy or under certain State laws, the creditor, assignee, or servicer may modify the forms to remove language regarding personal liability. Creditors, assignees, and servicers providing the required notice to a consumer whose ARM is converting to a fixed-rate mortgage, may modify the model language to explain that the interest rate will no longer adjust. Creditors, assignees, and servicers electing to provide consumers with interest rate notices in cases where the interest rate adjusts without a corresponding change in payment may modify the forms to fit that circumstance. A payment-option ARM, which is an ARM permitting consumers to choose among several different payment options for each billing period, is an example of a loan that may require modification of the § 1026.20(c) model and sample forms. See appendix H-30(C) for an example of an allocation table for a payment-option loan.

20(d) Initial rate adjustment.

1. Creditors, assignees, and servicers. Creditors, assignees, and servicers that own either the applicable adjustable-rate mortgage or the applicable mortgage servicing rights or both are subject to the requirements of § 1026.20(d). Creditors, assignees, and servicers are also subject to the requirements of any provision of subpart C that governs § 1026.20(d). For example, the form requirements of § 1026.17(a) apply to § 1026.20(d) disclosures and thus, assignees and servicers, as well as creditors, are subject to those requirements. While creditors, assignees, and servicers are all subject to the requirements of § 1026.20(d), they may decide among themselves which of them will provide the required disclosures.

2. Loan modifications. Under § 1026.20(d), the interest rate adjustment disclosures are required only for the initial interest rate adjustment occurring pursuant to the loan contract. Accordingly, creditors, assignees, and servicers need not provide the disclosures for interest rate adjustments occurring in loan modifications made for loss mitigation purposes. The initial interest rate adjustment occurring pursuant to the modified loan contract, however, is subject to the requirements of § 1026.20(d).

3. Timing and form of initial rate adjustment. The requirement that § 1026.20(d) disclosures be provided in writing, separate and distinct from all other correspondence, means that the initial ARM interest rate adjustment notice must be provided to consumers as a separate document but may, in the case of mailing the disclosure, be in the same envelope with other material and, in the case of emailing the disclosure, be a separate attachment from other attachments in the same email. The requirement that the disclosures be provided to consumers between 210 and 240 days “before the first payment at the adjusted level is due” means the creditor, assignee, or servicer must deliver the notice or place it in the mail between 210 and 240 days prior to the due date, excluding any grace or courtesy periods, of the first payment calculated using the adjusted interest rate.

4. Conversions. When an open-end account converts to a closed-end adjustable-rate mortgage, the § 1026.20(d) disclosure is not required until the implementation of the initial interest rate adjustment post-conversion. For example, for an open-end account that converts to a closed-end 3/1 hybrid ARM, i.e., an ARM with a fixed rate of interest for the first three years after which the interest rate adjusts annually, the § 1026.20(d) disclosure would not be required until three years after the conversion when the interest rate adjusts for the first time.

Paragraph 20(d)(1)(i).

1. In general. An adjustable-rate mortgage, as defined in § 1026.20(d)(1)(i), is a variable-rate transaction as that term is used in subpart C, except as distinguished by comment § 1026.20(d)(1)(ii)-2. The requirements of this section are not limited to transactions financing the initial acquisition of the consumer's principal dwelling.

Paragraph 20(d)(1)(ii).

1. Short-term ARMs. Under § 1026.20(d)(1)(ii), construction, home improvement, bridge, and other loans with terms of one year or less are not subject to the requirements in § 1026.20(d). In determining the term of a construction loan that may be permanently financed by the same creditor or assignee, the creditor or assignee may treat the construction and the permanent phases as separate transactions with distinct terms to maturity or as a single combined transaction.

2. Non-adjustable-rate mortgages. The following transactions, if structured as fixed-rate and not as adjustable-rate mortgages based on an index or formula, are not subject to § 1026.20(d):

i. Shared-equity or shared-appreciation mortgages;

ii. Price-level adjusted or other indexed mortgages that have a fixed rate of interest but provide for periodic adjustments to payments and the loan balance to reflect changes in an index measuring prices or inflation;

iii. Graduated-payment mortgages or step-rate transactions;

iv. Renewable balloon-payment instruments; and

v. Preferred-rate loans.

Paragraph 20(d)(2)(i).

1. Date of the disclosure. The date that must appear on the disclosure is the date the creditor, assignee, or servicer generates the notice to be provided to the consumer.

Paragraph 20(d)(2)(iii)(A).

1. Current and new interest rates. The current interest rate is the interest rate that applies on the date of the disclosure. The new interest rate is the interest rate used to calculate the new payment and may be an estimate pursuant to § 1026.20(d)(2). The new payment, if calculated from an estimated new interest rate, will also be an estimate. The “new interest rate” has the same meaning as the “adjusted interest rate.” The requirements of § 1026.20(d)(2)(iii)(A) do not preclude creditors, assignees, and servicers from rounding the interest rate, pursuant to the requirements of the ARM contract.

Paragraph 20(d)(2)(v).

1. Rate limits and foregone interest rate increases. Interest rate carryover, or foregone interest rate increases, is the amount of interest rate increase foregone at the first ARM interest rate adjustment that, subject to rate caps, can be added to future interest rate adjustments to increase, or to offset decreases in, the rate determined by using the index or formula. The disclosures required by § 1026.20(d)(2)(v) regarding foregone interest rate increases apply only to transactions permitting interest rate carryover.

Paragraph 20(d)(2)(vii).

1. Amortization statement. For ARMs requiring the payment of interest only, such as interest-only loans, § 1026.20(d)(2)(vii) requires a statement that the new payment covers all of the interest but none of the principal, and therefore will not reduce the loan balance. For negatively-amortizing ARMs, § 1026.20(d)(2)(vii) requires a statement that the new payment covers only part of the interest and none of the principal, and therefore the unpaid interest will be added to the principal balance.

2. Amortization payment. Disclosure of the payment needed to amortize fully the outstanding balance at the new interest rate over the remainder of the loan term is required only when negative amortization occurs as a result of the interest rate adjustment. The disclosure is not required simply because a loan has interest-only or partially-amortizing payments. For example, an ARM with a five-year term and payments based on a longer amortization schedule, in which the final payment will equal the periodic payment plus the remaining unpaid balance, does not require disclosure of the payment necessary to amortize fully the loan in the remainder of the five-year term. A disclosure is also not required when the new payment is sufficient to prevent negative amortization but the final loan payment will be a different amount due to rounding.

Paragraph 20(d)(2)(viii).

1. Prepayment penalty. The creditor, assignee, or servicer of an ARM with no prepayment penalty, as that term is used in § 1026.20(d)(2)(viii), may decide to exclude the prepayment section from the § 1026.20(d) disclosure, retain the prepayment section and insert after the heading “None” or other indication that there is no prepayment penalty, or indicate there is no prepayment penalty in some other manner. See also comment to Appendices G and H - Open-End and Closed-End Model Forms and Clauses - 1.vi.

Paragraph 20(d)(3)(i).

1. Format of disclosures. The requirements of § 1026.20(d)(3)(i) and (iii) to provide the § 1026.20(d) disclosures in the same order as, and with headings and format substantially similar to, the model and sample forms do not preclude creditors, assignees, and servicers from modifying the disclosures to accommodate particular consumer circumstances or transactions not addressed by the forms. For example, in the case of a consumer bankruptcy or under certain State laws, the creditor, assignee, or servicer may modify the forms to remove language regarding personal liability. A payment-option ARM, which is an ARM permitting consumers to choose among several different payment options for each billing period, is an example of a loan that may require modification of the § 1026.20(d) model and sample forms. See Appendix H-30(C) for an example of an allocation table for a payment-option loan.

20(e) Escrow account cancellation notice for certain mortgage transactions.

20(e)(1) Scope.

1. Real property or dwelling. For purposes of § 1026.20(e)(1), the term “real property” includes vacant and unimproved land. The term “dwelling” includes vacation and second homes and mobile homes, boats, and trailers used as residences. See § 1026.2(a)(19) and related commentary for additional guidance regarding the term “dwelling.”

2. Escrow account established in connection with the consumer's delinquency or default. Neither creditors nor servicers are required to provide the disclosures required by § 1026.20(e)(2) when an escrow account that was established solely in connection with the consumer's delinquency or default on the underlying debt obligation will be cancelled.

3. Termination of the underlying debt obligation. Neither creditors nor servicers are required to provide disclosures required by § 1026.20(e)(2) when the underlying debt obligation for which an escrow account was established is terminated, including by repayment, refinancing, rescission, and foreclosure.

20(e)(2) Content requirements.

1. Clear and conspicuous standard. The clear and conspicuous standard generally requires that disclosures be in a reasonably understandable form and readily noticeable to the consumer.

Paragraph 20(e)(2)(i).

1. Escrow closing fee. Section 1026.20(e)(2)(i) requires the creditor to itemize the amount of any fee the creditor or servicer imposes on the consumer in connection with the closure of the consumer's escrow account, labeled “Escrow Closing Fee.” If the creditor or servicer independently decides to cancel the escrow account, rather than agreeing to close it at the request of the consumer, and does not charge a fee in connection with the cancellation, the creditor or service complies with § 1026.20(e)(2) by leaving the disclosure blank on the front-side of the one-page document described in § 1026.20(e)(4).

20(e)(3) Optional information.

1. Optional information permitted. Section 1026.20(e)(3) lists information that the creditor or servicer may, at its option, include on the notice required by § 1026.20(e). To comply with § 1026.20(e)(3), the creditor or servicer may place the information required by § 1026.20(e)(3), other than the name and logo of the creditor or servicer, between the heading required by § 1026.20(e)(2) and the disclosures required by § 1026.20(e)(2)(i) and (ii). The name and logo may be placed above the heading required § 1026.20(e)(2).

20(e)(4) Form of disclosures.

1. Grouped and separate. The disclosures required by § 1026.20(e)(2) must be grouped together on the front side of a separate one-page document that contains no other material.

2. Notice must be in writing in a form that the consumer may keep. The notice containing the disclosures required by § 1026.20(e)(2) must be in writing in a form that the consumer may keep. See also § 1026.17(a) and related commentary for additional guidance on the form requirements applicable to the disclosures required by § 1026.20(e)(2).

3. Modifications of disclosures. The requirements of § 1026.20(e)(4) to provide the § 1026.20(e) disclosures with the headings, content, order, and format substantially similar to model form H-29 in appendix H to this part do not preclude creditors and servicers from modifying the disclosures to accommodate particular consumer circumstances or transactions not addressed by the form or from adjusting the statement required by § 1026.20(e)(2)(ii)(A), concerning consequences if the consumer fails to pay property costs, to the circumstances of the particular consumer.

20(e)(5) Timing.

20(e)(5)(i) Cancellation upon consumer's request.

1. Timing requirements Section 1026.20(e)(5)(i) provides that if the creditor or servicer cancels the escrow account at the consumer's request, the creditor or servicer shall ensure that the consumer receives the disclosures required by § 1026.20(e)(2) no later than three business days before closure of the consumer's escrow account. For example, for closure to occur on Thursday, the consumer must receive the disclosures on or before Monday, assuming each weekday is a business day. For purposes of § 1026.20(e)(5), the term “business day” means all calendar days except Sundays and legal public holidays referred to in § 1026.2(a)(6). See comment 2(a)(6)-2.

20(e)(5)(iii) Receipt of disclosure.

1. Timing of receipt. Section 1026.20(e)(5)(iii) provides that if the disclosures required under § 1026.20(e)(2) are not provided to the consumer in person, the consumer is considered to have received the disclosures three business days after they are delivered or placed in the mail. If the creditor or servicer provides the disclosures required by § 1026.20(e)(2) by mail, the consumer is considered to have received them three business days after they are placed in the mail for purposes of determining when the waiting periods required by § 1026.20(e)(5)(i) and (ii) begins. Creditors and servicers that use electronic mail or a courier to provide disclosures may also follow this approach. If, however, the creditor or servicer delivers the disclosures required by § 1026.20(e)(2) to the consumer in person, the escrow account may be closed any time on the third or 30th business day following the date of delivery, as applicable. Whatever method is used to provide disclosures, creditors and servicers may rely on documentation of receipt in determining when the waiting periods required by § 1026.20(e)(5)(i) and (ii) begin.