Previous version (effective
May 15, 2023 to
Oct. 1, 2023)
For each transaction other than a mortgage transaction subject to § 1026.19(e) and (f), the creditor shall disclose the following information as applicable:
1. As applicable.
i. The disclosures required by this section need be made only as applicable. Any disclosure not relevant to a particular transaction may be eliminated entirely. For example:
A. In a loan transaction, the creditor may delete disclosure of the total sale price.
B. In a credit sale requiring disclosure of the total sale price under § 1026.18(j), the creditor may delete any reference to a downpayment where no downpayment is involved.
ii. Where the amounts of several numerical disclosures are the same, the “as applicable” language also permits creditors to combine the terms, so long as it is done in a clear and conspicuous manner. For example:
A. In a transaction in which the amount financed equals the total of payments, the creditor may disclose “amount financed/total of payments,” together with descriptive language, followed by a single amount.
B. However, if the terms are separated on the disclosure statement and separate space is provided for each amount, both disclosures must be completed, even though the same amount is entered in each space.
2. Format. See the commentary to § 1026.17 and appendix H for a discussion of the format to be used in making these disclosures, as well as acceptable modifications.
3. Scope of coverage.
i. Section 1026.18 applies to closed-end consumer credit transactions, other than transactions that are subject to § 1026.19(e) and (f). Section 1026.19(e) and (f) applies to closed-end consumer credit transactions that are secured by real property or a cooperative unit, other than reverse mortgages subject to § 1026.33. Accordingly, the disclosures required by § 1026.18 apply only to closed-end consumer credit transactions that are:
A. Unsecured;
B. Secured by personal property that is not a dwelling;
C. Secured by personal property (other than a cooperative unit) that is a dwelling and are not also secured by real property; or
D. Reverse mortgages subject to § 1026.33.
ii. Of the foregoing transactions that are subject to § 1026.18, the creditor discloses a payment schedule under § 1026.18(g) for those described in paragraphs i.A and i.B of this comment. For transactions described in paragraphs i.C and i.D of this comment, the creditor discloses an interest rate and payment summary table under § 1026.18(s). See also comments 18(g)-6 and 18(s)-4 for additional guidance on the applicability to different transaction types of §§ 1026.18(g) or (s) and 1026.19(e) and (f).
iii. Because § 1026.18 does not apply to transactions secured by real property or a cooperative unit, other than reverse mortgages, references in the section and its commentary to “mortgages” refer only to transactions described in paragraphs i.C and i.D of this comment, as applicable.
(a) Creditor. The identity of the creditor making the disclosures.
1. Identification of creditor. The creditor making the disclosures must be identified. This disclosure may, at the creditor's option, appear apart from the other disclosures. Use of the creditor's name is sufficient, but the creditor may also include an address and/or telephone number. In transactions with multiple creditors, any one of them may make the disclosures; the one doing so must be identified.
(b) Amount financed. The amount financed, using that term, and a brief description such as the amount of credit provided to you or on your behalf. The amount financed is calculated by:
1. Disclosure required. The net amount of credit extended must be disclosed using the term amount financed and a descriptive explanation similar to the phrase in the regulation.
(1) Determining the principal loan amount or the cash price (subtracting any downpayment);
1. Downpayments. A downpayment is defined in § 1026.2(a)(18) to include, at the creditor's option, certain deferred downpayments or pick-up payments. A deferred downpayment that meets the criteria set forth in the definition may be treated as part of the downpayment, at the creditor's option.
i. Deferred downpayments that are not treated as part of the downpayment (either because they do not meet the definition or because the creditor simply chooses not to treat them as downpayments) are included in the amount financed.
ii. Deferred downpayments that are treated as part of the downpayment are not part of the amount financed under § 1026.18(b)(1).
(2) Adding any other amounts that are financed by the creditor and are not part of the finance charge; and
1. Adding other amounts. Fees or other charges that are not part of the finance charge and that are financed rather than paid separately at consummation of the transaction are included in the amount financed. Typical examples are real estate settlement charges and premiums for voluntary credit life and disability insurance excluded from the finance charge under § 1026.4. This paragraph does not include any amounts already accounted for under § 1026.18(b)(1), such as taxes, tag and title fees, or the costs of accessories or service policies that the creditor includes in the cash price.
i. Prepaid finance charges that are paid separately in cash or by check should be deducted under § 1026.18(b)(3) in calculating the amount financed. To illustrate:
A. A consumer applies for a loan of $2,500 with a $40 loan fee. The face amount of the note is $2,500 and the consumer pays the loan fee separately by cash or check at closing. The principal loan amount for purposes of § 1026.18(b)(1) is $2,500 and $40 should be deducted under § 1026.18(b(3), thereby yielding an amount financed of $2,460.
ii. In some instances, as when loan fees are financed by the creditor, finance charges are incorporated in the face amount of the note. Creditors have the option, when the charges are not add-on or discount charges, of determining a principal loan amount under § 1026.18(b)(1) that either includes or does not include the amount of the finance charges. (Thus the principal loan amount may, but need not, be determined to equal the face amount of the note.) When the finance charges are included in the principal loan amount, they should be deducted as prepaid finance charges under § 1026.18(b)(3). When the finance charges are not included in the principal loan amount, they should not be deducted under § 1026.18(b)(3). The following examples illustrate the application of § 1026.18(b) to this type of transaction. Each example assumes a loan request of $2,500 with a loan fee of $40; the creditor assesses the loan fee by increasing the face amount of the note to $2,540.
A. If the creditor determines the principal loan amount under § 1026.18(b)(1) to be $2,540, it has included the loan fee in the principal loan amount and should deduct $40 as a prepaid finance charge under § 1026.18(b)(3), thereby obtaining an amount financed of $2,500.
B. If the creditor determines the principal loan amount under § 1026.18(b)(1) to be $2,500, it has not included the loan fee in the principal loan amount and should not deduct any amount under § 1026.18(b)(3), thereby obtaining an amount financed of $2,500.
iii. The same rules apply when the creditor does not increase the face amount of the note by the amount of the charge but collects the charge by withholding it from the amount advanced to the consumer. To illustrate, the following examples assume a loan request of $2,500 with a loan fee of $40; the creditor prepares a note for $2,500 and advances $2,460 to the consumer.
A. If the creditor determines the principal loan amount under § 1026.18(b)(1) to be $2,500, it has included the loan fee in the principal loan amount and should deduct $40 as a prepaid finance charge under § 1026.18(b)(3), thereby obtaining an amount financed of $2,460.
B. If the creditor determines the principal loan amount under § 1026.18(b)(1) to be $2,460, it has not included the loan fee in the principal loan amount and should not deduct any amount under § 1026.18(b)(3), thereby obtaining an amount financed of $2,460.
iv. Thus in the examples where the creditor derives the net amount of credit by determining a principal loan amount that does not include the amount of the finance charge, no subtraction is appropriate. Creditors should note, however, that although the charges are not subtracted as prepaid finance charges in those examples, they are nonetheless finance charges and must be treated as such.
2. Add-on or discount charges. All finance charges must be deducted from the amount of credit in calculating the amount financed. If the principal loan amount reflects finance charges that meet the definition of a prepaid finance charge in § 1026.2, those charges are included in the § 1026.18(b)(1) amount and deducted under § 1026.18(b)(3). However, if the principal loan amount includes finance charges that do not meet the definition of a prepaid finance charge, the § 1026.18(b)(1) amount must exclude those finance charges. The following examples illustrate the application of § 1026.18(b) to these types of transactions. Each example assumes a loan request of $1000 for 1 year, subject to a 6 percent precomputed interest rate, with a $10 loan fee paid separately at consummation.
i. The creditor assesses add-on interest of $60 which is added to the $1000 in loan proceeds for an obligation with a face amount of $1060. The principal for purposes of § 1026.18(b)(1) is $1000, no amounts are added under § 1026.18(b)(2), and the $10 loan fee is a prepaid finance charge to be deducted under § 1026.18(b)(3). The amount financed is $990.
ii. The creditor assesses discount interest of $60 and distributes $940 to the consumer, who is liable for an obligation with a face amount of $1000. The principal under § 1026.18(b)(1) is $940, which results in an amount financed of $930, after deduction of the $10 prepaid finance charge under § 1026.18(b)(3).
iii. The creditor assesses $60 in discount interest by increasing the face amount of the obligation to $1060, with the consumer receiving $1000. The principal under § 1026.18(b)(1) is thus $1000 and the amount financed $990, after deducting the $10 prepaid finance charge under § 1026.18(b)(3).
i. The creditor has 2 alternatives in complying with § 1026.18(c):
A. The creditor may inform the consumer, on the segregated disclosures, that a written itemization of the amount financed will be provided on request, furnishing the itemization only if the customer in fact requests it.
B. The creditor may provide an itemization as a matter of course, without notifying the consumer of the right to receive it or waiting for a request.
ii. Whether given as a matter of course or only on request, the itemization must be provided at the same time as the other disclosures required by § 1026.18, although separate from those disclosures.
2. Additional information. Section 1026.18(c) establishes only a minimum standard for the material to be included in the itemization of the amount financed. Creditors have considerable flexibility in revising or supplementing the information listed in § 1026.18(c) and shown in model form H-3, although no changes are required. The creditor may, for example, do one or more of the following:
i. Include amounts that reflect payments not part of the amount financed. For example, escrow items and certain insurance premiums may be included, as discussed in the commentary to § 1026.18(g).
ii. Organize the categories in any order. For example, the creditor may rearrange the terms in a mathematical progression that depicts the arithmetic relationship of the terms.
iii. Add categories. For example, in a credit sale, the creditor may include the cash price and the downpayment. If the credit sale involves a trade-in of the consumer's car and an existing lien on that car exceeds the value of the trade-in amount, the creditor may disclose the consumer's trade-in value, the creditor's payoff of the existing lien, and the resulting additional amount financed.
iv. Further itemize each category. For example, the amount paid directly to the consumer may be subdivided into the amount given by check and the amount credited to the consumer's savings account.
v. Label categories with different language from that shown in § 1026.18(c). For example, an amount paid on the consumer's account may be revised to specifically identify the account as “your auto loan with us.”
vi. Delete, leave blank, mark “N/A,” or otherwise note inapplicable categories in the itemization. For example, in a credit sale with no prepaid finance charges or amounts paid to others, the amount financed may consist of only the cash price less downpayment. In this case, the itemization may be composed of only a single category and all other categories may be eliminated.
3. Amounts appropriate to more than one category. When an amount may appropriately be placed in any of several categories and the creditor does not wish to revise the categories shown in § 1026.18(c), the creditor has considerable flexibility in determining where to show the amount. For example, in a credit sale, the portion of the purchase price being financed by the creditor may be viewed as either an amount paid to the consumer or an amount paid on the consumer's account.
4. RESPA transactions. The Real Estate Settlement Procedures Act (RESPA) requires creditors to provide a good faith estimate of closing costs and a settlement statement listing the amounts paid by the consumer. Reverse mortgages subject to RESPA and § 1026.18 are exempt from the requirements of § 1026.18(c) if the creditor complies with RESPA's requirements for a good faith estimate and settlement statement. The itemization of the amount financed need not be given, even though the content and timing of the good faith estimate and settlement statement under RESPA differ from the requirements of §§ 1026.18(c) and 1026.19(a)(2). If a creditor chooses to substitute RESPA's settlement statement for the itemization when redisclosure is required under § 1026.19(a)(2), the statement must be delivered to the consumer at or prior to consummation. The disclosures required by §§ 1026.18(c) and 1026.19(a)(2) may appear on the same page or on the same document as the good faith estimate or the settlement statement, so long as the requirements of § 1026.17(a) are met.
(1) Except as provided in paragraphs (c)(2) and (c)(3) of this section, a separate written itemization of the amount financed, including:
(i) The amount of any proceeds distributed directly to the consumer.
1. Amounts paid to consumer. This encompasses funds given to the consumer in the form of cash or a check, including joint proceeds checks, as well as funds placed in an asset account. It may include money in an interest-bearing account even if that amount is considered a required deposit under § 1026.18(r). For example, in a transaction with total loan proceeds of $500, the consumer receives a check for $300 and $200 is required by the creditor to be put into an interest-bearing account. Whether or not the $200 is a required deposit, it is part of the amount financed. At the creditor's option, it may be broken out and labeled in the itemization of the amount financed.
(ii) The amount credited to the consumer's account with the creditor.
1. Amounts credited to consumer's account. The term consumer's account refers to an account in the nature of a debt with that creditor. It may include, for example, an unpaid balance on a prior loan, a credit sale balance or other amounts owing to that creditor. It does not include asset accounts of the consumer such as savings or checking accounts.
(iii) Any amounts paid to other persons by the creditor on the consumer's behalf. The creditor shall identify those persons. The following payees may be described using generic or other general terms and need not be further identified: public officials or government agencies, credit reporting agencies, appraisers, and insurance companies.
1. Amounts paid to others. This includes, for example, tag and title fees; amounts paid to insurance companies for insurance premiums; security interest fees, and amounts paid to credit bureaus, appraisers or public officials. When several types of insurance premiums are financed, they may, at the creditor's option, be combined and listed in one sum, labeled “insurance” or similar term. This includes, but is not limited to, different types of insurance premiums paid to one company and different types of insurance premiums paid to different companies. Except for insurance companies and other categories noted in § 1026.18(c)(1)(iii), third parties must be identified by name.
2. Charges added to amounts paid to others. A sum is sometimes added to the amount of a fee charged to a consumer for a service provided by a third party (such as for an extended warranty or a service contract) that is payable in the same amount in comparable cash and credit transactions. In the credit transaction, the amount is retained by the creditor. Given the flexibility permitted in meeting the requirements of the amount financed itemization (see the commentary to § 1026.18(c)), the creditor in such cases may reflect that the creditor has retained a portion of the amount paid to others. For example, the creditor could add to the category “amount paid to others” language such as “(we may be retaining a portion of this amount).”
1. Prepaid finance charge. Prepaid finance charges that are deducted under § 1026.18(b)(3) must be disclosed under this section. The prepaid finance charges must be shown as a total amount but may, at the creditor's option, also be further itemized and described. All amounts must be reflected in this total, even if portions of the prepaid finance charge are also reflected elsewhere. For example, if at consummation the creditor collects interim interest of $30 and a credit report fee of $10, a total prepaid finance charge of $40 must be shown. At the creditor's option, the credit report fee paid to a third party may also be shown elsewhere as an amount included in § 1026.18(c)(1)(iii). The creditor may also further describe the 2 components of the prepaid finance charge, although no itemization of this element is required by § 1026.18(c)(1)(iv).
2. Prepaid mortgage insurance premiums. Regulation X under RESPA, 12 CFR 1024.8, requires creditors to give consumers a settlement statement disclosing the costs associated with reverse mortgage loan transactions. Included on the settlement statement are mortgage insurance premiums collected at settlement, which are prepaid finance charges. In calculating the total amount of prepaid finance charges, creditors should use the amount for mortgage insurance listed on the line for mortgage insurance on the settlement statement (line 1003 on HUD-1 or HUD 1-A), without adjustment, even if the actual amount collected at settlement may vary because of RESPA's escrow accounting rules. Figures for mortgage insurance disclosed in conformance with RESPA shall be deemed to be accurate for purposes of Regulation Z.
(2) The creditor need not comply with paragraph (c)(1) of this section if the creditor provides a statement that the consumer has the right to receive a written itemization of the amount financed, together with a space for the consumer to indicate whether it is desired, and the consumer does not request it.
(3) Good faith estimates of settlement costs provided for transactions subject to the Real Estate Settlement Procedures Act (12 U.S.C. 2601 et seq.) may be substituted for the disclosures required by paragraph (c)(1) of this section.
(d) Finance charge. The finance charge, using that term, and a brief description such as “the dollar amount the credit will cost you.”
1. Disclosure required. The creditor must disclose the finance charge as a dollar amount, using the term finance charge, and must include a brief description similar to that in § 1026.18(d). The creditor may, but need not, further modify the descriptor for variable rate transactions with a phrase such as which is subject to change. The finance charge must be shown on the disclosures only as a total amount; the elements of the finance charge must not be itemized in the segregated disclosures, although the regulation does not prohibit their itemization elsewhere.
(1) Mortgage loans. In a transaction secured by real property or a dwelling, the disclosed finance charge and other disclosures affected by the disclosed finance charge (including the amount financed and the annual percentage rate) shall be treated as accurate if the amount disclosed as the finance charge:
(i) Is understated by no more than $100; or
(ii) Is greater than the amount required to be disclosed.
(2) Other credit. In any other transaction, the amount disclosed as the finance charge shall be treated as accurate if, in a transaction involving an amount financed of $1,000 or less, it is not more than $5 above or below the amount required to be disclosed; or, in a transaction involving an amount financed of more than $1,000, it is not more than $10 above or below the amount required to be disclosed.
1. Tolerance. When a finance charge error results in a misstatement of the amount financed, or some other dollar amount for which the regulation provides no specific tolerance, the misstated disclosure does not violate the Act or the regulation if the finance charge error is within the permissible tolerance under this paragraph.
(e) Annual percentage rate. The annual percentage rate, using that term, and a brief description such as “the cost of your credit as a yearly rate.” For any transaction involving a finance charge of $5 or less on an amount financed of $75 or less, or a finance charge of $7.50 or less on an amount financed of more than $75, the creditor need not disclose the annual percentage rate.
1. Disclosure required. The creditor must disclose the cost of the credit as an annual rate, using the term annual percentage rate, plus a brief descriptive phrase comparable to that used in § 1026.18(e). For variable rate transactions, the descriptor may be further modified with a phrase such as which is subject to change. Under § 1026.17(a), the terms annual percentage rate and finance charge must be more conspicuous than the other required disclosures.
2. Exception. Section 1026.18(e) provides an exception for certain transactions in which no annual percentage rate disclosure is required.
1. Coverage. The requirements of § 1026.18(f) apply to all transactions in which the terms of the legal obligation allow the creditor to increase the rate originally disclosed to the consumer. It includes not only increases in the interest rate but also increases in other components, such as the rate of required credit life insurance. The provisions, however, do not apply to increases resulting from delinquency (including late payment), default, assumption, acceleration or transfer of the collateral. Section 1026.18(f)(1) applies to variable-rate transactions that are not secured by the consumer's principal dwelling and to those that are secured by the principal dwelling but have a term of one year or less. Section 1026.18(f)(2) applies to variable-rate transactions that are secured by the consumer's principal dwelling and have a term greater than one year. Moreover, transactions subject to § 1026.18(f)(2) are subject to the special early disclosure requirements of § 1026.19(b). (However, “shared-equity” or “shared-appreciation” mortgages are subject to the disclosure requirements of § 1026.18(f)(1) and not to the requirements of §§ 1026.18(f)(2) and 1026.19(b) regardless of the general coverage of those sections.) Creditors are permitted under § 1026.18(f)(1) to substitute in any variable-rate transaction the disclosures required under § 1026.19(b) for those disclosures ordinarily required under § 1026.18(f)(1). Creditors who provide variable-rate disclosures under § 1026.19(b) must comply with all of the requirements of that section, including the timing of disclosures, and must also provide the disclosures required under § 1026.18(f)(2). Creditors substituting § 1026.19(b) disclosures for § 1026.18(f)(1) disclosures may, but need not, also provide disclosures pursuant to § 1026.20(c). (Substitution of disclosures under § 1026.18(f)(1) in transactions subject to § 1026.19(b) is not permitted.)
(1) Except as provided in paragraph (f)(3) of this section, if the annual percentage rate may increase after consummation in a transaction not secured by the consumer's principal dwelling or in a transaction secured by the consumer's principal dwelling with a term of one year or less, the following disclosures:
1. Terms used in disclosure. In describing the variable rate feature, the creditor need not use any prescribed terminology. For example, limitations and hypothetical examples may be described in terms of interest rates rather than annual percentage rates. The model forms in appendix H provide examples of ways in which the variable rate disclosures may be made.
2. Conversion feature. In variable-rate transactions with an option permitting consumers to convert to a fixed-rate transaction, the conversion option is a variable-rate feature that must be disclosed. In making disclosures under § 1026.18(f)(1), creditors should disclose the fact that the rate may increase upon conversion; identify the index or formula used to set the fixed rate; and state any limitations on and effects of an increase resulting from conversion that differ from other variable-rate features. Because § 1026.18(f)(1)(iv) requires only one hypothetical example (such as an example of the effect on payments resulting from changes in the index), a second hypothetical example need not be given.
(i) The circumstances under which the rate may increase.
1. Circumstances. The circumstances under which the rate may increase include identification of any index to which the rate is tied, as well as any conditions or events on which the increase is contingent.
i. When no specific index is used, any identifiable factors used to determine whether to increase the rate must be disclosed.
ii. When the increase in the rate is purely discretionary, the fact that any increase is within the creditor's discretion must be disclosed.
iii. When the index is internally defined (for example, by that creditor's prime rate), the creditor may comply with this requirement by either a brief description of that index or a statement that any increase is in the discretion of the creditor. An externally defined index, however, must be identified.
1. Limitations. This includes any maximum imposed on the amount of an increase in the rate at any time, as well as any maximum on the total increase over the life of the transaction. Except for private education loans disclosures, when there are no limitations, the creditor may, but need not, disclose that fact, and limitations do not include legal limits in the nature of usury or rate ceilings under state or Federal statutes or regulations. (See § 1026.30 for the rule requiring that a maximum interest rate be included in certain variable-rate transactions.) For disclosures with respect to private education loan disclosures, see comment 47(b)(1)-2.
1. Effects. Disclosure of the effect of an increase refers to an increase in the number or amount of payments or an increase in the final payment. In addition, the creditor may make a brief reference to negative amortization that may result from a rate increase. (See the commentary to § 1026.17(a)(1) regarding directly related information.) If the effect cannot be determined, the creditor must provide a statement of the possible effects. For example, if the exercise of the variable-rate feature may result in either more or larger payments, both possibilities must be noted.
(iv) An example of the payment terms that would result from an increase.
1. Hypothetical example. The example may, at the creditor's option appear apart from the other disclosures. The creditor may provide either a standard example that illustrates the terms and conditions of that type of credit offered by that creditor or an example that directly reflects the terms and conditions of the particular transaction. In transactions with more than one variable-rate feature, only one hypothetical example need be provided. (See the commentary to § 1026.17(a)(1) regarding disclosure of more than one hypothetical example as directly related information.)
2. Hypothetical example not required. The creditor need not provide a hypothetical example in the following transactions with a variable-rate feature:
i. Demand obligations with no alternate maturity date.
ii. Private education loans as defined in § 1026.46(b)(5).
iii. Multiple-advance construction loans disclosed pursuant to appendix D, Part I.
(2) If the annual percentage rate may increase after consummation in a transaction secured by the consumer's principal dwelling with a term greater than one year, the following disclosures:
1. Disclosure required. In variable-rate transactions that have a term greater than one year and are secured by the consumer's principal dwelling, the creditor must give special early disclosures under § 1026.19(b) in addition to the later disclosures required under § 1026.18(f)(2). The disclosures under § 1026.18(f)(2) must state that the transaction has a variable-rate feature and that variable-rate disclosures have been provided earlier. (See the commentary to § 1026.17(a)(1) regarding the disclosure of certain directly related information in addition to the variable-rate disclosures required under § 1026.18(f)(2).)
(i) The fact that the transaction contains a variable-rate feature.
(ii) A statement that variable-rate disclosures have been provided earlier.
(3) Information provided in accordance with §§ 1026.18(f)(2) and 1026.19(b) may be substituted for the disclosures required by paragraph (f)(1) of this section.
(g) Payment schedule. Other than for a transaction that is subject to paragraph (s) of this section, the number, amounts, and timing of payments scheduled to repay the obligation.
1. Amounts included in repayment schedule. The repayment schedule should reflect all components of the finance charge, not merely the portion attributable to interest. A prepaid finance charge, however, should not be shown in the repayment schedule as a separate payment. The payments may include amounts beyond the amount financed and finance charge. For example, the disclosed payments may, at the creditor's option, reflect certain insurance premiums where the premiums are not part of either the amount financed or the finance charge, as well as real estate escrow amounts such as taxes added to the payment in mortgage transactions.
2. Deferred downpayments. As discussed in the commentary to § 1026.2(a)(18), deferred downpayments or pick-up payments that meet the conditions set forth in the definition of downpayment may be treated as part of the downpayment. Even if treated as a downpayment, that amount may nevertheless be disclosed as part of the payment schedule, at the creditor's option.
3. Total number of payments. In disclosing the number of payments for transactions with more than one payment level, creditors may but need not disclose as a single figure the total number of payments for all levels. For example, in a transaction calling for 108 payments of $350, 240 payments of $335, and 12 payments of $330, the creditor need not state that there will be a total of 360 payments.
4. Timing of payments.
i. General rule. Section 1026.18(g) requires creditors to disclose the timing of payments. To meet this requirement, creditors may list all of the payment due dates. They also have the option of specifying the “period of payments” scheduled to repay the obligation. As a general rule, creditors that choose this option must disclose the payment intervals or frequency, such as “monthly” or “bi-weekly,” and the calendar date that the beginning payment is due. For example, a creditor may disclose that payments are due “monthly beginning on July 1, 1998.” This information, when combined with the number of payments, is necessary to define the repayment period and enable a consumer to determine all of the payment due dates.
ii. Exception. In a limited number of circumstances, the beginning-payment date is unknown and difficult to determine at the time disclosures are made. For example, a consumer may become obligated on a credit contract that contemplates the delayed disbursement of funds based on a contingent event, such as the completion of repairs. Disclosures may also accompany loan checks that are sent by mail, in which case the initial disbursement and repayment dates are solely within the consumer's control. In such cases, if the beginning-payment date is unknown the creditor may use an estimated date and label the disclosure as an estimate pursuant to § 1026.17(c). Alternatively, the disclosure may refer to the occurrence of a particular event, for example, by disclosing that the beginning payment is due “30 days after the first loan disbursement.” This information also may be included with an estimated date to explain the basis for the creditor's estimate. See comment 17(a)(1)-5.iii.
5. [Reserved]
6. Mortgage transactions. Section 1026.18(g) applies to closed-end transactions, other than transactions that are subject to § 1026.18(s) or § 1026.19(e) and (f). Section 1026.18(s) applies to closed-end transactions secured by real property or a dwelling, unless they are subject to § 1026.19(e) and (f). Section 1026.19(e) and (f) applies to closed-end transactions secured by real property or a cooperative unit, other than reverse mortgages. Thus, if a closed-end consumer credit transaction is secured by real property, a cooperative unit, or a dwelling and the transaction is a reverse mortgage or the dwelling is personal property but not a cooperative unit, then the creditor discloses an interest rate and payment summary table in accordance with § 1026.18(s). See comment 18(s)-4. If a closed-end consumer credit transaction is secured by real property or a cooperative unit and is not a reverse mortgage, the creditor discloses a projected payments table in accordance with §§ 1026.37(c) and 1026.38(c), as required by § 1026.19(e) and (f). In all such cases, the creditor is not subject to the requirements of § 1026.18(g). On the other hand, if a closed-end consumer credit transaction is not secured by real property or a dwelling (for example, if it is unsecured or secured by an automobile), the creditor discloses a payment schedule in accordance with § 1026.18(g) and is not subject to the requirements of § 1026.18(s) or §§ 1026.37(c) and 1026.38(c).
(1) In a demand obligation with no alternate maturity date, the creditor may comply with this paragraph by disclosing the due dates or payment periods of any scheduled interest payments for the first year.
1. Demand obligations. In demand obligations with no alternate maturity date, the creditor has the option of disclosing only the due dates or periods of scheduled interest payments in the first year (for example, “interest payable quarterly” or “interest due the first of each month”). The amounts of the interest payments need not be shown.
(2) In a transaction in which a series of payments varies because a finance charge is applied to the unpaid principal balance, the creditor may comply with this paragraph by disclosing the following information:
1. Abbreviated disclosure. The creditor may disclose an abbreviated payment schedule when the amount of each regularly scheduled payment (other than the first or last payment) includes an equal amount to be applied on principal and a finance charge computed by application of a rate to the decreasing unpaid balance. In addition, in transactions where payments vary because interest and principal are paid at different intervals, the two series of payments may be disclosed separately and the abbreviated payment schedule may be used for the interest payments. For example, in transactions with fixed quarterly principal payments and monthly interest payments based on the outstanding principal balance, the amount of the interest payments will change quarterly as principal declines. In such cases the creditor may treat the interest and principal payments as two separate series of payments, separately disclosing the number, amount, and due dates of principal payments, and, using the abbreviated payment schedule, the number, amount, and due dates of interest payments. This option may be used when interest and principal are scheduled to be paid on the same date of the month as well as on different dates of the month. The creditor using this alternative must disclose the dollar amount of the highest and lowest payments and make reference to the variation in payments.
2. Combined payment schedule disclosures. Creditors may combine the option in § 1026.18(g)(2) with the general payment schedule requirements in transactions where only a portion of the payment schedule meets the conditions of § 1026.18(g)(2). For example, in a transaction where payments rise sharply for five years and then decline over the next 25 years, the first five years would be disclosed under the general rule in § 1026.18(g) and the next 25 years according to the abbreviated schedule in § 1026.18(g)(2).
3. Effect on other disclosures. Section 1026.18(g)(2) applies only to the payment schedule disclosure. The actual amounts of payments must be taken into account in calculating and disclosing the finance charge and the annual percentage rate.
(i) The dollar amounts of the largest and smallest payments in the series.
(ii) A reference to the variations in the other payments in the series.
(h) Total of payments. The total of payments, using that term, and a descriptive explanation such as “the amount you will have paid when you have made all scheduled payments.” In any transaction involving a single payment, the creditor need not disclose the total of payments.
1. Disclosure required. The total of payments must be disclosed using that term, along with a descriptive phrase similar to the one in the regulation. The descriptive explanation may be revised to reflect a variable rate feature with a brief phrase such as “based on the current annual percentage rate which may change.”
2. Calculation of total of payments. The total of payments is the sum of the payments disclosed under § 1026.18(g). For example, if the creditor disclosed a deferred portion of the downpayment as part of the payment schedule, that payment must be reflected in the total disclosed under this paragraph. To calculate the total of payments amount for transactions subject to § 1026.18(s), creditors should use the rules in § 1026.18(g) and associated commentary and, for adjustable-rate transactions, comments 17(c)(1)-8 and -10.
3. Exception. Section 1026.18(h) permits creditors to omit disclosure of the total of payments in single-payment transactions. This exception does not apply to a transaction calling for a single payment of principal combined with periodic payments of interest.
4. Demand obligations. In demand obligations with no alternate maturity date, the creditor may omit disclosure of payment amounts under § 1026.18(g)(1). In those transactions, the creditor need not disclose the total of payments.
(i) Demand feature. If the obligation has a demand feature, that fact shall be disclosed. When the disclosures are based on an assumed maturity of 1 year as provided in § 1026.17(c)(5), that fact shall also be disclosed.
1. Disclosure requirements. The disclosure requirements of this provision apply not only to transactions payable on demand from the outset, but also to transactions that are not payable on demand at the time of consummation but convert to a demand status after a stated period. In demand obligations in which the disclosures are based on an assumed maturity of 1 year under § 1026.17(c)(5), that fact must also be stated. appendix H contains model clauses that may be used in making this disclosure.
2. Covered demand features. The type of demand feature triggering the disclosures required by § 1026.18(i) includes only those demand features contemplated by the parties as part of the legal obligation. For example, this provision does not apply to transactions that covert to a demand status as a result of the consumer's default. A due-on-sale clause is not considered a demand feature. A creditor may, but need not, treat its contractual right to demand payment of a loan made to its executive officers as a demand feature to the extent that the contractual right is required by Regulation O of the Board of Governors of the Federal Reserve System (12 CFR 215.5) or other Federal law.
3. Relationship to payment schedule disclosures. As provided in § 1026.18(g)(1), in demand obligations with no alternate maturity date, the creditor need only disclose the due dates or payment periods of any scheduled interest payments for the first year. If the demand obligation states an alternate maturity, however, the disclosed payment schedule must reflect that stated term; the special rule in § 1026.18(g)(1) is not available.
(j) Total sale price. In a credit sale, the total sale price, using that term, and a descriptive explanation (including the amount of any downpayment) such as “the total price of your purchase on credit, including your downpayment of $__.” The total sale price is the sum of the cash price, the items described in paragraph (b)(2), and the finance charge disclosed under paragraph (d) of this section.
1. Disclosure required. In a credit sale transaction, the total sale price must be disclosed using that term, along with a descriptive explanation similar to the one in the regulation. For variable rate transactions, the descriptive phrase may, at the creditor's option, be modified to reflect the variable rate feature. For example, the descriptor may read: “The total cost of your purchase on credit, which is subject to change, including your downpayment of * * *.” The reference to a downpayment may be eliminated in transactions calling for no downpayment.
2. Calculation of total sale price. The figure to be disclosed is the sum of the cash price, other charges added under § 1026.18(b)(2), and the finance charge disclosed under § 1026.18(d).
3. Effect of existing liens. When a credit sale transaction involves property that is being used as a trade-in (an automobile, for example) and that has a lien exceeding the value of the trade-in, the total sale price is affected by the amount of any cash provided. (See comment 2(a)(18)-3.) To illustrate, assume a consumer finances the purchase of an automobile with a cash price of $20,000. Another vehicle used as a trade-in has a value of $8,000 but has an existing lien of $10,000, leaving a $2,000 deficit that the consumer must finance.
i. If the consumer pays $1,500 in cash, the creditor may apply the cash first to the lien, leaving a $500 deficit, and reflect a downpayment of $0. The total sale price would include the $20,000 cash price, an additional $500 financed under § 1026.18(b)(2), and the amount of the finance charge. Alternatively, the creditor may reflect a downpayment of $1,500 and finance the $2,000 deficit. In that case, the total sale price would include the sum of the $20,000 cash price, the $2,000 lien payoff amount as an additional amount financed, and the amount of the finance charge.
ii. If the consumer pays $3,000 in cash, the creditor may apply the cash first to extinguish the lien and reflect the remainder as a downpayment of $1,000. The total sale price would reflect the $20,000 cash price and the amount of the finance charge. (The cash payment extinguishes the trade-in deficit and no charges are added under § 1026.18(b)(2).) Alternatively, the creditor may elect to reflect a downpayment of $3,000 and finance the $2,000 deficit. In that case, the total sale price would include the sum of the $20,000 cash price, the $2,000 lien payoff amount as an additional amount financed, and the amount of the finance charge.
1. Disclosure required. The creditor must give a definitive statement of whether or not a prepayment penalty will be imposed or a prepayment rebate will be given.
i. The fact that no prepayment penalty will be imposed may not simply be inferred from the absence of a prepayment penalty disclosure; the creditor must indicate that prepayment will not result in a prepayment penalty.
ii. If a prepayment penalty or prepayment rebate is possible for one type of prepayment, even though not for all, a positive disclosure is required. This applies to any type of prepayment, whether voluntary or involuntary as in the case of prepayments resulting from acceleration.
iii. Any difference in prepayment rebate or prepayment penalty policy, depending on whether prepayment is voluntary or not, must not be disclosed with the segregated disclosures.
2. Rebate-penalty disclosure. A single transaction may involve both a precomputed finance charge and a finance charge computed by application of a rate to the unpaid balance (for example, mortgages with mortgage-guarantee insurance). In these cases, disclosures about both prepayment rebates and prepayment penalties are required. Sample form H-15 in appendix H to this part illustrates a mortgage transaction in which both rebate and penalty disclosures are necessary.
3. Prepaid finance charge. The existence of a prepaid finance charge in a transaction does not, by itself, require a disclosure under § 1026.18(k). A prepaid finance charge is not considered a prepayment penalty under § 1026.18(k)(1), nor does it require a disclosure under § 1026.18(k)(2). At its option, however, a creditor may consider a prepaid finance charge to be under § 1026.18(k)(2). If a disclosure is made under § 1026.18(k)(2) with respect to a prepaid finance charge or other finance charge, the creditor may further identify that finance charge. For example, the disclosure may state that the borrower “will not be entitled to a refund of the prepaid finance charge” or some other term that describes the finance charge.
(1) When an obligation includes a finance charge computed from time to time by application of a rate to the unpaid principal balance, a statement indicating whether or not a charge may be imposed for paying all or part of a loan's principal balance before the date on which the principal is due.
1. Examples of prepayment penalties. For purposes of § 1026.18(k)(1), the following are examples of prepayment penalties:
i. A charge determined by treating the loan balance as outstanding for a period of time after prepayment in full and applying the interest rate to such “balance,” even if the charge results from interest accrual amortization used for other payments in the transaction under the terms of the loan contract. “Interest accrual amortization” refers to the method by which the amount of interest due for each period (e.g., month) in a transaction's term is determined. For example, “monthly interest accrual amortization” treats each payment as made on the scheduled, monthly due date even if it is actually paid early or late (until the expiration of any grace period). Thus, under the terms of a loan contract providing for monthly interest accrual amortization, if the amount of interest due on May 1 for the preceding month of April is $3,000, the loan contract will require payment of $3,000 in interest for the month of April whether the payment is made on April 20, on May 1, or on May 10. In this example, if the consumer prepays the loan in full on April 20 and if the accrued interest as of that date is $2,000, then assessment of a charge of $3,000 constitutes a prepayment penalty of $1,000 because the amount of interest actually earned through April 20 is only $2,000.
ii. A fee, such as an origination or other loan closing cost, that is waived by the creditor on the condition that the consumer does not prepay the loan. However, the term prepayment penalty does not include a waived bona fide third-party charge imposed by the creditor if the consumer pays all of a covered transaction's principal before the date on which the principal is due sooner than 36 months after consummation. For example, assume that at consummation, the creditor waives $3,000 in closing costs to cover bona fide third-party charges but the terms of the loan agreement provide that the creditor may recoup the $3,000 in waived charges if the consumer repays the entire loan balance sooner than 36 months after consummation. The $3,000 charge is not a prepayment penalty. In contrast, for example, assume that at consummation, the creditor waives $3,000 in closing costs to cover bona fide third-party charges but the terms of the loan agreement provide that the creditor may recoup $4,500 in part to recoup waived charges, if the consumer repays the entire loan balance sooner than 36 months after consummation. The $3,000 that the creditor may impose to cover the waived bona fide third-party charges is not a prepayment penalty, but the additional $1,500 charge is a prepayment penalty and must be disclosed pursuant to § 1026.37(k)(1).
iii. A minimum finance charge in a simple interest transaction.
2. Fees that are not prepayment penalties. For purposes of § 1026.18(k)(1), fees which are not prepayment penalties include, for example:
i. Fees imposed for preparing and providing documents when a loan is paid in full, if such fees are imposed whether or not the loan is prepaid. Examples include a loan payoff statement, a reconveyance document, or another document releasing the creditor's security interest in the dwelling that secures the loan.
(2) When an obligation includes a finance charge other than the finance charge described in paragraph (k)(1) of this section, a statement indicating whether or not the consumer is entitled to a rebate of any finance charge if the obligation is prepaid in full or in part.
1. Rebate of finance charge.
i. This applies to any finance charges that do not take account of each reduction in the principal balance of an obligation. This category includes, for example:
A. Precomputed finance charges such as add-on charges. This includes computing a refund of an unearned finance charge, such as precomputed interest, by a method that is less favorable to the consumer than the actuarial method, as defined by section 933(d) of the Housing and Community Development Act of 1992, 15 U.S.C. 1615(d). For purposes of computing a refund of unearned interest, if using the actuarial method defined by applicable State law results in a refund that is greater than the refund calculated by using the method described in section 933(d) of the Housing and Community Development Act of 1992, creditors should use the State law definition in determining if a refund is a prepayment penalty.
B. Charges that take account of some but not all reductions in principal, such as mortgage guarantee insurance assessed on the basis of an annual declining balance, when the principal is reduced on a monthly basis.
ii. No description of the method of computing earned or unearned finance charges is required or permitted as part of the segregated disclosures under § 1026.18(k)(2).
(l) Late payment. Any dollar or percentage charge that may be imposed before maturity due to a late payment, other than a deferral or extension charge.
1. Definition. This paragraph requires a disclosure only if charges are added to individual delinquent installments by a creditor who otherwise considers the transaction ongoing on its original terms. Late payment charges do not include:
i. The right of acceleration.
ii. Fees imposed for actual collection costs, such as repossession charges or attorney's fees.
iii. Deferral and extension charges.
iv. The continued accrual of simple interest at the contract rate after the payment due date. However, an increase in the interest rate is a late payment charge to the extent of the increase.
2. Content of disclosure. Many state laws authorize the calculation of late charges on the basis of either a percentage or a specified dollar amount, and permit imposition of the lesser or greater of the 2 charges. The disclosure made under § 1026.18(l) may reflect this alternative. For example, stating that the charge in the event of a late payment is 5% of the late amount, not to exceed $5.00, is sufficient. Many creditors also permit a grace period during which no late charge will be assessed; this fact may be disclosed as directly related information. (See the commentary to § 1026.17(a).)
(m) Security interest. The fact that the creditor has or will acquire a security interest in the property purchased as part of the transaction, or in other property identified by item or type.
1. Purchase money transactions. When the collateral is the item purchased as part of, or with the proceeds of, the credit transaction, § 1026.18(m) requires only a general identification such as “the property purchased in this transaction.” However, the creditor may identify the property by item or type instead of identifying it more generally with a phrase such as “the property purchased in this transaction.” For example, a creditor may identify collateral as “a motor vehicle,” or as “the property purchased in this transaction.” Any transaction in which the credit is being used to purchase the collateral is considered a purchase money transaction and the abbreviated identification may be used, whether the obligation is treated as a loan or a credit sale.
2. Nonpurchase money transactions. In nonpurchase money transactions, the property subject to the security interest must be identified by item or type. This disclosure is satisfied by a general disclosure of the category of property subject to the security interest, such as “motor vehicles,” “securities,” “certain household items,” or “household goods.” (Creditors should be aware, however, that the Federal credit practices rules, as well as some state laws, prohibit certain security interests in household goods.) At the creditor's option, however, a more precise identification of the property or goods may be provided.
3. Mixed collateral. In some transactions in which the credit is used to purchase the collateral, the creditor may also take other property of the consumer as security. In those cases, a combined disclosure must be provided, consisting of an identification of the purchase money collateral consistent with comment 18(m)-1 and a specific identification of the other collateral consistent with comment 18(m)-2.
4. After-acquired property. An after-acquired property clause is not a security interest to be disclosed under § 1026.18(m).
5. Spreader clause. The fact that collateral for pre-existing credit with the institution is being used to secure the present obligation constitutes a security interest and must be disclosed. (Such security interests may be known as “spreader” or “dragnet” clauses, or as “cross-collateralization” clauses.) A specific identification of that collateral is unnecessary but a reminder of the interest arising from the prior indebtedness is required. The disclosure may be made by using language such as “collateral securing other loans with us may also secure this loan.” At the creditor's option, a more specific description of the property involved may be given.
6. Terms used in disclosure. No specified terminology is required in disclosing a security interest. Although the disclosure may, at the creditor's option, use the term security interest, the creditor may designate its interest by using, for example, pledge, lien, or mortgage.
7. Collateral from third party. In certain transactions, the consumer's obligation may be secured by collateral belonging to a third party. For example, a loan to a student may be secured by an interest in the property of the student's parents. In such cases, the security interest is taken in connection with the transaction and must be disclosed, even though the property encumbered is owned by someone other than the consumer.
(n) Insurance and debt cancellation. The items required by § 1026.4(d) in order to exclude certain insurance premiums and debt cancellation fees from the finance charge.
1. Location. This disclosure may, at the creditor's option, appear apart from the other disclosures. It may appear with any other information, including the amount financed itemization, any information prescribed by state law, or other supplementary material. When this information is disclosed with the other segregated disclosures, however, no additional explanatory material may be included.
2. Debt cancellation. Creditors may use the model credit insurance disclosures only if the debt cancellation coverage constitutes insurance under state law. Otherwise, they may provide a parallel disclosure that refers to debt cancellation coverage.
(o) Certain security interest charges. The disclosures required by § 1026.4(e) in order to exclude from the finance charge certain fees prescribed by law or certain premiums for insurance in lieu of perfecting a security interest.
1. Format. No special format is required for these disclosures; under § 1026.4(e), taxes and fees paid to government officials with respect to a security interest may be aggregated, or may be broken down by individual charge. For example, the disclosure could be labeled “filing fees and taxes” and all funds disbursed for such purposes may be aggregated in a single disclosure. This disclosure may appear, at the creditor's option, apart from the other required disclosures. The inclusion of this information on a statement required under the Real Estate Settlement Procedures Act is sufficient disclosure for purposes of Truth in Lending.
(p) Contract reference. A statement that the consumer should refer to the appropriate contract document for information about nonpayment, default, the right to accelerate the maturity of the obligation, and prepayment rebates and penalties. At the creditor's option, the statement may also include a reference to the contract for further information about security interests and, in a residential mortgage transaction, about the creditor's policy regarding assumption of the obligation.
1. Content. Creditors may substitute, for the phrase “appropriate contract document,” a reference to specific transaction documents in which the additional information is found, such as “promissory note” or “retail installment sale contract.” A creditor may, at its option, delete inapplicable items in the contract reference, as for example when the contract documents contain no information regarding the right of acceleration.
(q) Assumption policy. In a residential mortgage transaction, a statement whether or not a subsequent purchaser of the dwelling from the consumer may be permitted to assume the remaining obligation on its original terms.
1. Policy statement. In many mortgages, the creditor cannot determine, at the time disclosure must be made, whether a loan may be assumable at a future date on its original terms. For example, the assumption clause commonly used in mortgages sold to the Federal National Mortgage Association and the Federal Home Loan Mortgage Corporation conditions an assumption on a variety of factors such as the creditworthiness of the subsequent borrower, the potential for impairment of the lender's security, and execution of an assumption agreement by the subsequent borrower. In cases where uncertainty exists as to the future assumability of a mortgage, the disclosure under § 1026.18(q) should reflect that fact. In making disclosures in such cases, the creditor may use phrases such as “subject to conditions,” “under certain circumstances,” or “depending on future conditions.” The creditor may provide a brief reference to more specific criteria such as a due-on-sale clause, although a complete explanation of all conditions is not appropriate. For example, the disclosure may state, “Someone buying your home may be allowed to assume the mortgage on its original terms, subject to certain conditions, such as payment of an assumption fee.” See comment 17(a)(1)-5 for an example for a reference to a due-on-sale clause.
2. Original terms. The phrase original terms for purposes of § 1026.18(q) does not preclude the imposition of an assumption fee, but a modification of the basic credit agreement, such as a change in the contract interest rate, represents different terms.
(r) Required deposit. If the creditor requires the consumer to maintain a deposit as a condition of the specific transaction, a statement that the annual percentage rate does not reflect the effect of the required deposit. A required deposit need not include, for example:
1. Disclosure required. The creditor must inform the consumer of the existence of a required deposit. (Appendix H provides a model clause that may be used in making that disclosure.) Section 1026.18(r) describes 3 types of deposits that need not be considered required deposits. Use of the phrase “need not” permits creditors to include the disclosure even in cases where there is doubt as to whether the deposit constitutes a required deposit.
2. Pledged account mortgages. In these transactions, a consumer pledges as collateral funds that the consumer deposits in an account held by the creditor. The creditor withdraws sums from that account to supplement the consumer's periodic payments. Creditors may treat these pledged accounts as required deposits or they may treat them as consumer buydowns in accordance with the commentary to § 1026.17(c)(1).
3. Escrow accounts. The escrow exception in § 1026.18(r) applies, for example, to accounts for such items as maintenance fees, repairs, or improvements, whether in a realty or a nonrealty transaction. (See the commentary to § 1026.17(c)(1) regarding the use of escrow accounts in consumer buydown transactions.)
4. Interest-bearing accounts. When a deposit earns at least 5 percent interest per year, no disclosure is required under § 1026.18(r). This exception applies whether the deposit is held by the creditor or by a third party.
5. Morris Plan transactions. A deposit under a Morris Plan, in which a deposit account is created for the sole purpose of accumulating payments and this is applied to satisfy entirely the consumer's obligation in the transaction, is not a required deposit.
6. Examples of amounts excluded. The following are among the types of deposits that need not be treated as required deposits:
i. Requirement that a borrower be a customer or a member even if that involves a fee or a minimum balance.
ii. Required property insurance escrow on a mobile home transaction.
iii. Refund of interest when the obligation is paid in full.
iv. Deposits that are immediately available to the consumer.
v. Funds deposited with the creditor to be disbursed (for example, for construction) before the loan proceeds are advanced.
vi. [Reserved]
vii. Escrow of loan proceeds to be released when the repairs are completed.
(1) An escrow account for items such as taxes, insurance or repairs;
(2) A deposit that earns not less than 5 percent per year; or
(3) Payments under a Morris Plan.
(s) Interest rate and payment summary for mortgage transactions. For a closed-end transaction secured by real property or a dwelling, other than a transaction that is subject to § 1026.19(e) and (f), the creditor shall disclose the following information about the interest rate and payments:
1. In general. Section 1026.18(s) prescribes format and content for disclosure of interest rates and monthly (or other periodic) payments for reverse mortgages and certain transactions secured by dwellings that are personal property but not cooperative units. The information in § 1026.18(s)(2) through (4) is required to be in the form of a table, except as otherwise provided, with headings and format substantially similar to model clause H-4(E), H-4(F), H-4(G), or H-4(H) in appendix H to this part. A disclosure that does not include the shading shown in a model clause but otherwise follows the model clause's headings and format is substantially similar to that model clause. Where § 1026.18(s)(2) through (4) or the applicable model clause requires that a column or row of the table be labeled using the word “monthly” but the periodic payments are not due monthly, the creditor should use the appropriate term, such as “bi-weekly” or “quarterly.” In all cases, the table should have no more than five vertical columns corresponding to applicable interest rates at various times during the loan's term; corresponding payments would be shown in horizontal rows. Certain loan types and terms are defined for purposes of § 1026.18(s) in § 1026.18(s)(7).
2. Amortizing loans. Loans described as amortizing in §§ 1026.18(s)(2)(i) and 1026.18(s)(3) include interest-only loans if they do not also permit negative amortization. (For rules relating to loans with balloon payments, see § 1026.18(s)(5)). If an amortizing loan is an adjustable-rate mortgage with an introductory rate (less than the fully-indexed rate), creditors must provide a special explanation of introductory rates. See § 1026.18(s)(2)(iii).
3. Negative amortization. For negative amortization loans, creditors must follow the rules in §§ 1026.18(s)(2)(ii) and 1026.18(s)(4) in disclosing interest rates and monthly payments. Loans with negative amortization also require special explanatory disclosures about rates and payments. See § 1026.18(s)(6). Loans with negative amortization include “payment option” loans, in which the consumer is permitted to make minimum payments that will cover only some of the interest accruing each month. See also comment 17(c)(1)-12, regarding graduated-payment adjustable-rate mortgages.
4. Scope of coverage in relation to § 1026.19(e) and (f). Section 1026.18(s) applies to transactions secured by real property or a dwelling, other than transactions that are subject to § 1026.19(e) and (f). Those provisions apply to closed-end transactions secured by real property or a cooperative unit, other than reverse mortgages. Accordingly, § 1026.18(s) governs only closed-end reverse mortgages and closed-end transactions secured by a dwelling, other than a cooperative, that is personal property (such as a mobile home that is not deemed real property under State or other applicable law).
(1) Form of disclosures. The information in paragraphs (s)(2)-(4) of this section shall be in the form of a table, with no more than five columns, with headings and format substantially similar to Model Clause H-4(E), H-4(F), H-4(G), or H-4(H) in appendix H to this part. The table shall contain only the information required in paragraphs (s)(2)-(4) of this section, shall be placed in a prominent location, and shall be in a minimum 10-point font.
(A) For a fixed-rate mortgage, the interest rate at consummation.
1. Fixed rate loans — payment increases. Although the interest rate will not change after consummation for a fixed-rate loan, some fixed-rate loans may have periodic payments that increase after consummation. For example, the terms of the legal obligation may permit the consumer to make interest-only payments for a specified period such as the first five years after consummation. In such cases, the creditor must include the increased payment under § 1026.18(s)(3)(ii)(B) in the payment row, and must show the interest rate in the column for that payment, even though the rate has not changed since consummation. See also comment 17(c)(1)-13, regarding growth equity mortgages.
1. Adjustable-rate mortgages and step-rate mortgages. Creditors must disclose more than one interest rate for adjustable-rate mortgages and step-rate mortgages, in accordance with § 1026.18(s)(2)(i)(B). Creditors must assume that an adjustable-rate mortgage's interest rate will increase after consummation as rapidly as possible, taking into account the terms of the legal obligation.
2. Maximum interest rate during first five years - adjustable-rate mortgages and step-rate mortgages. The creditor must disclose the maximum rate that could apply during the first five years after consummation. If there are no interest rate caps other than the maximum rate required under § 1026.30, then the creditor should disclose only the rate at consummation and the maximum rate. Such a table would have only two columns.
i. For an adjustable-rate mortgage, the creditor must take into account any interest rate caps when disclosing the maximum interest rate during the first five years. The creditor must also disclose the earliest date on which that adjustment may occur.
ii. If the transaction is a step-rate mortgage, the creditor should disclose the rate that will apply after consummation. For example, the legal obligation may provide that the rate is 6 percent for the first two years following consummation, and then increases to 7 percent for at least the next three years. The creditor should disclose the maximum rate during the first five years as 7 percent and the date on which the rate is scheduled to increase to 7 percent.
3. Maximum interest rate at any time. The creditor must disclose the maximum rate that could apply at any time during the term of the loan and the earliest date on which the maximum rate could apply.
i. For an adjustable-rate mortgage, the creditor must take into account any interest rate caps in disclosing the maximum interest rate. For example, if the legal obligation provides that at each annual adjustment the rate may increase by no more than 2 percentage points, the creditor must take this limit into account in determining the earliest date on which the maximum possible rate may be reached.
ii. For a step-rate mortgage, the creditor should disclose the highest rate that could apply under the terms of the legal obligation and the date on which that rate will first apply.
(1) The interest rate at consummation and the period of time until the first interest rate adjustment may occur, labeled as the “introductory rate and monthly payment”;
(2) The maximum interest rate that may apply during the first five years after the date on which the first regular periodic payment will be due and the earliest date on which that rate may apply, labeled as “maximum during first five years”; and
(3) The maximum interest rate that may apply during the life of the loan and the earliest date on which that rate may apply, labeled as “maximum ever.”
(C) If the loan provides for payment increases as described in paragraph (s)(3)(i)(B) of this section, the interest rate in effect at the time the first such payment increase is scheduled to occur and the date on which the increase will occur, labeled as “first adjustment” if the loan is an adjustable-rate mortgage or, otherwise, labeled as “first increase.”
1. Payment increases. For some loans, the payment may increase following consummation for reasons unrelated to an interest rate adjustment. For example, an adjustable-rate mortgage may have an introductory fixed rate for the first five years following consummation and permit the borrower to make interest-only payments for the first three years. The disclosure requirement of § 1026.18(s)(2)(i)(C) applies to all amortizing loans, including interest-only loans, if the consumer's payment can increase in the manner described in § 1026.18(s)(3)(i)(B), even if it is not the type of loan covered by § 1026.18(s)(3)(i). Thus, § 1026.18(s)(2)(i)(C) requires that the creditor disclose the interest rate that corresponds to the first payment that includes principal as well as interest, even though the interest rate will not adjust at that time. In such cases, if the loan is an interest-only loan, the creditor also must disclose the corresponding periodic payment pursuant to § 1026.18(s)(3)(ii). The table would show, from left to right: The interest rate and payment at consummation with the payment itemized to show that the payment is being applied to interest only; the interest rate and payment when the interest-only option ends; the maximum interest rate and payment during the first five years; and the maximum possible interest rate and payment. The disclosure requirements of § 1026.18(s)(2)(i)(C) do not apply to minor payment variations resulting solely from the fact that months have different numbers of days.
(ii) Negative amortization loans. For a negative amortization loan:
1. Rate at consummation. In all cases the interest rate in effect at consummation must be disclosed, even if it will apply only for a short period such as one month.
2. Rates for adjustable-rate mortgages. The creditor must assume that interest rates rise as quickly as possible after consummation, in accordance with any interest rate caps under the legal obligation. For adjustable-rate mortgages with no rate caps except a lifetime maximum, creditors must assume that interest rate reaches the maximum at the first adjustment. For example, assume that the legal obligation provides for an interest rate at consummation of 1.5 percent. One month after consummation, the interest rate adjusts and will adjust monthly thereafter, according to changes in the index. The consumer may make payments that cover only part of the interest accrued each month, until the date the principal balance reaches 115 percent of its original balance, or until the end of the fifth year after consummation, whichever comes first. The maximum possible rate is 10.5 percent. No other limits on interest rates apply. The minimum required payment adjusts each year, and may increase by no more than 7.5 percent over the previous year's payment. The creditor should disclose the following rates and the dates when they are scheduled to occur: A rate of 1.5 percent for the first month following consummation and the minimum payment; a rate of 10.5 percent, and the corresponding minimum payment taking into account the 7.5 percent limit on payment increases, at the beginning of the second year; and a rate of 10.5 percent and the corresponding minimum payment taking into account the 7.5 percent payment increase limit, at the beginning of the third year. The creditor also must disclose the rate of 10.5 percent, the fully amortizing payment, and the date on which the consumer must first make such a payment under the terms of the legal obligation.
(A) The interest rate at consummation and, if it will adjust after consummation, the length of time until it will adjust, and the label “introductory” or “intro”;
(B) The maximum interest rate that could apply when the consumer must begin making fully amortizing payments under the terms of the legal obligation;
(C) If the minimum required payment will increase before the consumer must begin making fully amortizing payments, the maximum interest rate that could apply at the time of the first payment increase and the date the increase is scheduled to occur; and(D) If a second increase in the minimum required payment may occur before the consumer must begin making fully amortizing payments, the maximum interest rate that could apply at the time of the second payment increase and the date the increase is scheduled to occur.
(iii) Introductory rate disclosure for amortizing adjustable-rate mortgages. For an amortizing adjustable-rate mortgage, if the interest rate at consummation is less than the fully-indexed rate, placed in a box directly beneath the table required by paragraph (s)(1) of this section, in a format substantially similar to Model Clause H-4(I) in appendix H to this part:
1. Introductory rate. In some adjustable-rate mortgages, creditors may set an initial interest rate that is lower than the fully indexed rate at consummation. For amortizing loans with an introductory rate, creditors must disclose the information required in § 1026.18(s)(2)(iii) directly below the table.
(A) The interest rate that applies at consummation and the period of time for which it applies;
(B) A statement that, even if market rates do not change, the interest rate will increase at the first adjustment and a designation of the place in sequence of the month or year, as applicable, of such rate adjustment; and
1. Place in sequence. “Designation of the place in sequence” refers to identifying the month or year, as applicable, of the change in the rate resulting from the expiration of an introductory rate by its place in the sequence of months or years, as applicable, of the transaction's term. For example, if a transaction has a discounted rate for the first three years, § 1026.18(s)(2)(iii)(B) requires a statement such as, “In the fourth year, even if market rates do not change, this rate will increase to _%.”
1. Fully indexed rate. The fully indexed rate is defined in § 1026.18(s)(7) as the index plus the margin at consummation. For purposes of § 1026.18(s)(2)(iii)(C), “at consummation” refers to disclosures delivered at consummation, or three business days before consummation pursuant to § 1026.19(a)(2)(ii); for early disclosures delivered within three business days after receipt of a consumer's application pursuant to § 1026.19(a)(1), the fully indexed rate disclosed under § 1026.18(s)(2)(iii)(C) may be based on the index in effect at the time the disclosures are provided. The index in effect at consummation (or at the time of early disclosures) need not be used if a contract provides for a delay in the implementation of changes in an index value. For example, if the contract specifies that rate changes are based on the index value in effect 45 days before the change date, creditors may use any index value in effect during the 45 days before consummation (or any earlier date of disclosure) in calculating the fully indexed rate to be disclosed.
1. Payments corresponding to interest rates. Creditors must disclose the periodic payment that corresponds to each interest rate disclosed under § 1026.18(s)(2)(i)(A)-(C). The corresponding periodic payment is the regular payment for each such interest rate, without regard to any final payment that differs from others because of the rounding of periodic payments to account for payment amounts including fractions of cents. Balloon payments, however, must be disclosed as provided in § 1026.18(s)(5).
2. Principal and interest payment amounts; examples.
i. For fixed-rate interest-only transactions, § 1026.18(s)(3)(ii)(B) requires scheduled increases in the regular periodic payment amounts to be disclosed along with the date of the increase. For example, in a fixed-rate interest-only loan, a scheduled increase in the payment amount from an interest-only payment to a fully amortizing payment must be disclosed. Similarly, in a fixed-rate balloon loan, the balloon payment must be disclosed in accordance with § 1026.18(s)(5).
ii. For adjustable-rate mortgage transactions, § 1026.18(s)(3)(i)(A) requires that for each interest rate required to be disclosed under § 1026.18(s)(2)(i) (the interest rate at consummation, the maximum rate during the first five years, and the maximum possible rate) a corresponding payment amount must be disclosed.
iii. The format of the payment disclosure varies depending on whether all regular periodic payment amounts will include principal and interest, and whether there will be an escrow account for taxes and insurance.
(i) Principal and interest payments. If all periodic payments will be applied to accrued interest and principal, for each interest rate disclosed under paragraph (s)(2)(i) of this section:
(A) The corresponding periodic principal and interest payment, labeled as “principal and interest;”
(B) If the periodic payment may increase without regard to an interest rate adjustment, the payment that corresponds to the first such increase and the earliest date on which the increase could occur;
(C) If an escrow account will be established, an estimate of the amount of taxes and insurance, including any mortgage insurance or any functional equivalent, payable with each periodic payment; and
1. Taxes and insurance. An estimated payment amount for taxes and insurance must be disclosed if the creditor will establish an escrow account for such amounts. If the escrow account will include amounts for items other than taxes and insurance, such as homeowners association dues, the creditor may but is not required to include such items in the estimate. When such estimated escrow payments must be disclosed in multiple columns of the table, such as for adjustable- and step-rate transactions, each column should use the same estimate for taxes and insurance except that the estimate should reflect changes in periodic mortgage insurance premiums or any functionally equivalent fee that are known to the creditor at the time the disclosure is made. The estimated amounts of mortgage insurance premiums or any functionally equivalent fee should be based on the declining principal balance that will occur as a result of changes to the interest rate that are assumed for purposes of disclosing those rates under § 1026.18(s)(2) and accompanying commentary. The payment amount must include estimated amounts for property taxes and premiums for mortgage-related insurance required by the creditor, such as insurance against loss of or damage to property, or against liability arising out of the ownership or use of the property, or insurance protecting the creditor against the consumer's default or other credit loss. Premiums for credit insurance, debt suspension and debt cancellation agreements, however, should not be included. Except for periodic mortgage insurance premiums or any functionally equivalent fee included in the escrow payment under § 1026.18(s)(3)(i)(C), amounts included in the escrow payment disclosure such as property taxes and homeowner's insurance generally are not finance charges under § 1026.4 and, therefore, do not affect other disclosures, including the finance charge and annual percentage rate.
2. Mortgage insurance or any functional equivalent. For purposes of § 1026.18(s), “mortgage insurance or any functional equivalent” means the amounts identified in § 1026.4(b)(5). “Mortgage guarantees” (such as a United States Department of Veterans Affairs or United States Department of Agriculture guarantee) provide coverage similar to mortgage insurance, even if not technically considered insurance under State or other applicable law. For purposes of § 1026.18(s), “mortgage insurance or any functional equivalent” includes any mortgage guarantee. Payment amounts under § 1026.18(s)(3)(i) should reflect the consumer's mortgage insurance payments or any functionally equivalent fee until the date on which the creditor must automatically terminate coverage under applicable law, even though the consumer may have a right to request that the insurance be cancelled earlier. The payment amount must reflect the terms of the legal obligation, as determined by applicable State or other law. For example, assume that under applicable law, mortgage insurance must terminate after the 130th scheduled monthly payment, and the creditor collects at closing and places in escrow two months of premiums. If, under the legal obligation, the creditor will include mortgage insurance premiums in 130 payments and refund the escrowed payments when the insurance is terminated, payment amounts disclosed through the 130th payment should reflect premium payments. If, under the legal obligation, the creditor will apply the amount escrowed to the two final insurance payments, payments disclosed through the 128th payment should reflect premium payments. The escrow amount reflected on the disclosure should include mortgage insurance premiums even if they are not escrowed and even if there is no escrow account established for the transaction.
(D) The sum of the amounts disclosed under paragraphs (s)(3)(i)(A) and (C) of this section or (s)(3)(i)(B) and (C) of this section, as applicable, labeled as “total estimated monthly payment.”
1. Total monthly payment. For amortizing loans, each column should add up to a total estimated payment. The total estimated payment amount should be labeled. If periodic payments are not due monthly, the creditor should use the appropriate term such as “quarterly” or “annually.”
(ii) Interest-only payments. If the loan is an interest-only loan, for each interest rate disclosed under paragraph (s)(2)(i) of this section, the corresponding periodic payment and:
1. Interest-only loans that are also negative amortization loans. The rules in § 1026.18(s)(3)(ii) for disclosing payments on interest-only loans apply only if the loan is not also a negative amortization loan. If the loan is a negative amortization loan, even if it also has an interest-only feature, payments are disclosed under the rules in § 1026.18(s)(4).
(A) If the payment will be applied to only accrued interest, the amount applied to interest, labeled as “interest payment,” and a statement that none of the payment is being applied to principal;
(B) If the payment will be applied to accrued interest and principal, an itemization of the amount of the first such payment applied to accrued interest and to principal, labeled as “interest payment” and “principal payment,” respectively;
(C) The escrow information described in paragraph (s)(3)(i)(C) of this section; and
1. Escrows. See the commentary under § 1026.18(s)(3)(i)(C) for guidance on escrows for purposes of § 1026.18(s)(3)(ii)(C).
(D) The sum of all amounts required to be disclosed under paragraphs (s)(3)(ii)(A) and (C) of this section or (s)(3)(ii)(B) and (C) of this section, as applicable, labeled as “total estimated monthly payment.”
(4) Payments for negative amortization loans. For negative amortization loans:
1. Table. Section 1026.18(s)(1) provides that tables shall include only the information required in § 1026.18(s)(2)-(4). Thus, a table for a negative amortization loan must contain no more than two horizontal rows of payments and no more than five vertical columns of interest rates.
2. Payment amounts. The payment amounts disclosed under § 1026.18(s)(4) are the minimum or fully amortizing periodic payments, as applicable, corresponding to the interest rates disclosed under § 1026.18(s)(2)(ii). The corresponding periodic payment is the regular payment for each such interest rate, without regard to any final payment that differs from the rest because of the rounding of periodic payments to account for payment amounts including fractions of cents.
1. Minimum required payments. In one row of the table, the creditor must disclose the minimum required payment in each column of the table, corresponding to each interest rate or adjustment required in § 1026.18(s)(2)(ii). The payments in this row must be calculated based on an assumption that the consumer makes the minimum required payment for as long as possible under the terms of the legal obligation. This row should be identified as the minimum payment option, and the statement required by § 1026.18(s)(4)(i)(C) should be included in the heading for the row.
(A) The minimum periodic payment required until the first payment increase or interest rate increase, corresponding to the interest rate disclosed under paragraph (s)(2)(ii)(A) of this section;
(B) The minimum periodic payment that would be due at the first payment increase and the second, if any, corresponding to the interest rates described in paragraphs (s)(2)(ii)(C) and (D) of this section; and
(C) A statement that the minimum payment pays only some interest, does not repay any principal, and will cause the loan amount to increase;
(ii) The fully amortizing periodic payment amount at the earliest time when such a payment must be made, corresponding to the interest rate disclosed under paragraph (s)(2)(ii)(B) of this section; and
(iii) If applicable, in addition to the payments in paragraphs (s)(4)(i) and (ii) of this section, for each interest rate disclosed under paragraph (s)(2)(ii) of this section, the amount of the fully amortizing periodic payment, labeled as the “full payment option,” and a statement that these payments pay all principal and all accrued interest.
1. Fully amortizing payments. In one row of the table, the creditor must disclose the fully amortizing payment in each column of the table, corresponding to each interest rate required in § 1026.18(s)(2)(ii). The creditor must assume, for purposes of calculating the amounts in this row that the consumer makes only fully amortizing payments starting with the first scheduled payment.
1. General. A balloon payment is one that is more than two times the regular periodic payment. In a reverse mortgage transaction, the single payment is not considered a balloon payment. A balloon payment must be disclosed outside and below the table, unless the balloon payment coincides with an interest rate adjustment or a scheduled payment increase. In those cases, the balloon payment must be disclosed in the table.
(i) Except as provided in paragraph (s)(5)(ii) of this section, if the transaction will require a balloon payment, defined as a payment that is more than two times a regular periodic payment, the balloon payment shall be disclosed separately from other periodic payments disclosed in the table under this paragraph (s), outside the table and in a manner substantially similar to Model Clause H-4(J) in appendix H to this part.
(ii) If the balloon payment is scheduled to occur at the same time as another payment required to be disclosed in the table pursuant to paragraph (s)(3) or (s)(4) of this section, then the balloon payment must be disclosed in the table.
(6) Special disclosures for loans with negative amortization. For a negative amortization loan, the following information, in close proximity to the table required in paragraph (s)(1) of this section, with headings, content, and format substantially similar to Model Clause H-4(G) in appendix H to this part:
1. Escrows. See the commentary under § 1026.18(s)(3)(i)(C) for guidance on escrows for purposes of § 1026.18(s)(6). Under that guidance, because mortgage insurance payments and functionally equivalent fees decline over a loan's term, the payment amounts shown in the table should reflect the mortgage insurance payment and functionally equivalent fees that will be applicable at the time each disclosed periodic payment will be in effect. Accordingly, the disclosed mortgage insurance payment or functionally equivalent fee will be zero if it corresponds to a periodic payment that will occur after the creditor will be legally required to terminate mortgage insurance or any functional equivalent. On the other hand, because only one escrow amount is disclosed under § 1026.18(s)(6) for negative amortization loans and escrows that are not itemized in the payment amounts, the single escrow amount disclosed should reflect the mortgage insurance amount or any functionally equivalent fee that will be collected at the outset of the loan's term, even though that amount will decline in the future and ultimately will be discontinued pursuant to the terms of the mortgage insurance policy.
(i) The maximum interest rate, the shortest period of time in which such interest rate could be reached, the amount of estimated taxes and insurance included in each payment disclosed, and a statement that the loan offers payment options, two of which are shown.
(ii) The dollar amount of the increase in the loan's principal balance if the consumer makes only the minimum required payments for the maximum possible time and the earliest date on which the consumer must begin making fully amortizing payments, assuming that the maximum interest rate is reached at the earliest possible time.
(7) Definitions. For purposes of this § 1026.18(s):
1. Negative amortization loans. Under § 1026.18(s)(7)(v), a negative amortization loan is one that requires only a minimum periodic payment that covers only a portion of the accrued interest, resulting in negative amortization. For such a loan, § 1026.18(s)(4)(iii) requires creditors to disclose the fully amortizing periodic payment for each interest rate disclosed under § 1026.18(s)(2)(ii), in addition to the minimum periodic payment, regardless of whether the legal obligation explicitly recites that the consumer may make the fully amortizing payment. Some loan types that result in negative amortization do not meet the definition of negative amortization loan for purposes of § 1026.18(s). These include, for example, loans requiring level, amortizing payments but having a payment schedule containing gaps during which interest accrues and is added to the principal balance before regular, amortizing payments begin (or resume). For example, “seasonal income” loans may provide for amortizing payments during nine months of the year and no payments for the other three months; the required minimum payments (when made) are amortizing payments, thus such loans are not negative amortization loans under § 1026.18(s)(7)(v). An adjustable-rate loan that has fixed periodic payments that do not adjust when the interest rate adjusts also would not be disclosed as a negative amortization loan under § 1026.18(s). For example, assume the initial rate is 4%, for which the fully amortizing payment is $1500. Under the terms of the legal obligation, the consumer will make $1500 monthly payments even if the interest rate increases, and the additional interest is capitalized. The possibility (but not certainty) of negative amortization occurring after consummation does not make this transaction a negative amortization loan for purposes of § 1026.18(s). Loans that do not meet the definition of negative amortization loan, even if they may have negative amortization, are amortizing loans and are disclosed under §§ 1026.18(s)(2)(i) and 1026.18(s)(3).
(i) The term “adjustable-rate mortgage” means a transaction secured by real property or a dwelling for which the annual percentage rate may increase after consummation.
(ii) The term “step-rate mortgage” means a transaction secured by real property or a dwelling for which the interest rate will change after consummation, and the rates that will apply and the periods for which they will apply are known at consummation.
(iii) The term “fixed-rate mortgage” means a transaction secured by real property or a dwelling that is not an adjustable-rate mortgage or a step-rate mortgage.
(iv) The term “interest-only” means that, under the terms of the legal obligation, one or more of the periodic payments may be applied solely to accrued interest and not to loan principal; an “interest-only loan” is a loan that permits interest-only payments.
(v) The term “amortizing loan” means a loan in which payment of the periodic payments does not result in an increase in the principal balance under the terms of the legal obligation; the term “negative amortization” means payment of periodic payments that will result in an increase in the principal balance under the terms of the legal obligation; the term “negative amortization loan” means a loan, other than a reverse mortgage subject to § 1026.33, that provides for a minimum periodic payment that covers only a portion of the accrued interest, resulting in negative amortization.
(vi) The term “fully-indexed rate” means the interest rate calculated using the index value and margin at the time of consummation.
(t) “No-guarantee-to-refinance” statement —
(1) Disclosure. For a closed-end transaction secured by real property or a dwelling, other than a transaction that is subject to § 1026.19(e) and (f), the creditor shall disclose a statement that there is no guarantee the consumer can refinance the transaction to lower the interest rate or periodic payments.
(2) Format. The statement required by paragraph (t)(1) of this section must be in a form substantially similar to Model Clause H-4(K) in appendix H to this part.